What is a centrifuge, and what is its function?

Centrifuges are widely used in industries such as chemical engineering, petroleum, food processing, pharmaceuticals, mineral processing, coal mining, water treatment, and shipbuilding.

2012-05-22


Applications of Medical Centrifuges in the Beauty Industry

A stem cell centrifuge, also known as a beauty centrifuge, works by centrifuging autologous blood and using separation technology to activate growth factors. These activated growth factors are then injected into the skin via a non-surgical procedure.

2012-05-21


Causes of Bearing Heating in Centrifuge Motors

Generally, experienced centrifuge experts ask the manufacturer a series of questions about bearings when purchasing a centrifuge. There are several possible reasons for bearing overheating, and each case needs to be analyzed carefully and in detail.

2012-05-20


The main difference between centrifuges and separators

When filtering products, a separator should be used. A centrifuge does not have filtering capabilities; it merely uses centrifugal force to separate different phases into layers (note that this is not true separation).

2012-05-19


Factors Affecting Centrifuge Experimental Results and Key Considerations for Selection

When selecting a precision centrifuge, we need to consider the following five aspects. For ordinary centrifuges, it’s sufficient to choose based on two factors—rotational speed and capacity—depending on the workload.

2012-05-19


Software Operation and Debugging of Laboratory High-Speed Refrigerated Centrifuges

A high-speed refrigerated centrifuge is primarily used to extract the desired components from liquid mixtures. By virtue of the different densities of each substance, as the mixture undergoes high-speed rotation, the denser liquids settle at the bottom, while the less dense liquids float on top, thereby separating the liquid into distinct layers and allowing us to isolate the pure substances we need.

2012-05-09


The high-capacity centrifuge can be equipped with a multi-purpose adapter.

The lid provided with the angle rotor helps reduce friction, lower noise, and prevent accidents. It is essential to always use the lid when operating an angle rotor. If the lid is not used, significant eddy-current resistance and friction-induced heating will occur within the centrifuge chamber, placing an additional burden on both the centrifuge’s motor and refrigeration system and shortening the lifespan of the centrifuge.

2012-05-06


Lu Xiangyi Centrifuge – Holiday Notice for the May Day Labor Day Festival

》The holiday arrangement for the International Labor Day on May 1 is as follows: The International Labor Day on May 1 will be a three-day holiday from April 29 to May 1. April 28 (Saturday) will be a regular workday.

2012-04-29


Iran seals centrifuges, halting development of nuclear program.

Iran is reportedly considering accepting Russia’s proposal to halt its nuclear program development in order to avoid EU sanctions on Iran’s oil industry.

2012-04-26


A Further Discussion on the Operating Guidelines for High-Speed Centrifuges in Laboratories

When the centrifuge is in the pre-cooling state, the centrifuge lid must be closed. After the centrifugation is complete, once the rotor is removed, it should be inverted onto the lab bench, and any remaining water inside the chamber should be wiped dry. The centrifuge lid should remain open.

2012-04-23


< 1...119120121...128 >