High-speed centrifuges are used in the production of lithium battery electrolyte series products.

The project’s construction scope includes a production capacity of 200 tons per year of lithium hexafluorophosphate and 1,000 tons per year of lithium-ion battery electrolyte. The key equipment includes centrifuges, distillation columns, blending tanks, water treatment systems, pumps and motors, calcium carbide furnaces, air compressors, and drying units.

2012-04-17


Daily Maintenance and Care for Benchtop Centrifuges

When using a desktop centrifuge in our daily routine, we should first disconnect the power supply and release the centrifuge’s brake before starting it up. We can manually rotate the rotor to check whether there is any binding or jamming. Also, inspect other parts for looseness or any abnormal conditions.

2012-04-11


Selection and Classification of Laboratory Centrifuge Instruments and Equipment

It is commonly used for the rapid separation of large numbers of cells, subcellular components, bacteria, and pathogens. Centrifuges operating at speeds ranging from 5,000 to 30,000 RPM (revolutions per minute) are typically referred to as high-speed centrifuges.

2012-04-09


Requirements for Nitrogen Explosion-Proof Protection of Laboratory Centrifuges

Centrifuges used in the chemical and pharmaceutical industries require an effective nitrogen-protected, explosion-proof system design to ensure safe production.

2012-04-07


Development Opportunities in China's Centrifuge Market

2011 marked the beginning of the 12th Five-Year Plan. With strong support from the state, laboratory instruments experienced comprehensive development, and as a result, the laboratory centrifuge market also showed a thriving and vibrant outlook.

2012-03-31


Requirements for the Installation of Imported and Domestic Centrifuges

The operating status of domestically produced centrifuges relies on机组; these domestic centrifuges do not have an intermediate hopper and instead use labyrinth seals and soft seals to achieve solid-liquid phase sealing.

2012-03-31


2012-03-26


Centrifugation Requirements for Serum Separator Tube Coagulation-Inducing Blood Collection Tubes

To prepare high-quality serum samples using separation-gel-coated tubes, two critical steps are the complete clotting of the blood and proper centrifugation conditions. For centrifugation, a horizontal rotor in a benchtop centrifuge is required.

2012-03-21


Vibration-damping effect of rubber dampers in high-speed centrifuges

There are two types of shafts used in laboratory high-speed centrifuges. One type has a slender, elongated shaft that is inherently highly flexible, allowing it to automatically self-align.

2012-03-20


A Discussion on the Heat Dissipation Issues of Centrifuges

It’s perfectly normal for laboratory centrifuges to generate a lot of heat during operation. As the machine runs, it consumes electrical energy, which is converted into mechanical energy that drives the centrifuge rotor. A portion of this energy is transformed into heat and dissipated outward, causing the centrifuge components to warm up.

2012-03-17


< 1...120121122...128 >