The high-capacity centrifuge can be equipped with a multi-purpose adapter.
Release time:
2012-05-06
Overview:
The rotor is the primary component of a centrifuge. Simply put, a centrifuge can be divided into two main parts: the main unit and the detachable rotor (rotor head). A versatile main unit can typically be equipped with multiple rotors, allowing it to meet various needs by using different rotor models—thus effectively reducing procurement costs. However, when selecting a centrifuge, it’s important to pay attention to choosing one whose rotor is easy to assemble and disassemble. In most conventional centrifuges, the rotor directly fits onto the spindle; to minimize noise, manufacturers often ensure a very tight fit between the main unit and the rotor. Yet, this approach has a significant drawback: the rotor can easily become tightly locked onto the spindle, making disassembly extremely difficult. Moreover, this type of rotor-spindle coupling is highly directional—if the rotor’s orientation deviates from that of the motor spindle, it can generate substantial noise, shorten the machine’s service life, and in severe cases even lead to spindle breakage or rotor explosion. For example, German sigma centrifuges employ an expansion sleeve mechanism to secure the rotor onto the spindle, enabling effortless rotor assembly and disassembly regardless of how long the centrifuge has been in use, and preventing any risk of the rotor becoming stuck. The most commonly used rotors include fixed-angle rotors and horizontal rotors. Naturally, the more comprehensive the range of available rotors, the greater the functionality of the centrifuge. Therefore, when selecting a rotor, one usually takes into account the volume of frequently used samples and the specific centrifugation conditions. Typically, one horizontal rotor and one fixed-angle rotor are sufficient; additionally, one high-capacity (relatively low-speed) rotor and one small-capacity, high-speed rotor are recommended. Depending on the specific requirements of different tasks, other types of rotors can then be selected as needed.
In angle rotors, centrifuge tubes can be maintained at a fixed angle during centrifugation, allowing for higher rotor speeds. After centrifugation, the pellet settles along the sloped bottom of the tube. Rotors with larger capacities often come equipped with various “adapters” that enable them to accommodate smaller-volume sample tubes. For example, a 6x85ml rotor can hold 85ml centrifuge tubes in each of its six wells, but it can also accommodate 50ml or even 15–20ml tubes, making it versatile and multipurpose. However, due to the increased weight load, rotors with larger capacities typically have lower maximum rotational speeds compared to smaller ones; therefore, it’s important to ensure that the maximum centrifugal force generated by the rotor meets the requirements of your experiment. Since rotors designed for the highest speeds are usually optimized for 2ml microcentrifuge tubes, sometimes the cost of a single rotor can nearly equal the price of an entire small centrifuge—and this approach can also help reduce wear and tear on more expensive equipment. Some compact benchtop high-speed centrifuges offer fixed-angle rotors in different sizes (compatible with either 0.5ml or 2ml/1.5ml microcentrifuge tubes). In fact, unless you frequently use 0.5ml tubes exclusively and each centrifugation run involves relatively large sample volumes, it’s generally sufficient to choose a 2ml/1.5ml rotor paired with appropriate adapters (available for 0.2ml, 0.4ml, and 0.5ml tubes) to meet your needs. If you regularly work with PCR strip tubes, it might be more convenient to opt for a rotor designed specifically for 8-tube strips.
The lid provided with the angle rotor helps reduce friction, lower noise, and prevent accidents. It is essential to always use a lid when operating an angle rotor; otherwise, the un-covered centrifuge chamber will generate significant eddy-current drag and friction-induced heating, placing an additional burden on both the centrifuge’s motor and refrigeration system and shortening the machine’s service life. Additionally, there is a type of hermetically sealed rotor that enables airtight centrifugation, effectively preventing accidental leaks—a feature that is crucial for improving the experimental environment.
The horizontal rotor is equipped with either two or four baskets, which hang vertically from the rotor when stationary. These baskets come with various adapters to accommodate centrifuge tubes of different capacities. Once the rotor reaches a speed exceeding 600 rpm, the centrifuge tubes assume a horizontal position, and the sample sedimentation occurs along the axial direction of the tubes, eventually settling at the bottom for easy collection. Since horizontal rotors are less stable than fixed-angle rotors, their maximum rotational speeds are significantly lower, limiting them primarily to low-speed centrifugation applications. The baskets feature different adapters that allow placement of various types of centrifuge tubes, even meeting the needs of flat-bottom tube centrifugation—for instance, Lu Xiangyi’s high-capacity centrifuges can be fitted with multi-purpose adapters, enabling multiple microplates, culture plates, deep-well plates, PCR plates, slide boxes, large-scale nucleic acid purification kit purification plates, and even cell culture flasks to be centrifuged using the same horizontal rotor as large-volume centrifuge bottles. This approach helps save costs while satisfying diverse experimental requirements. Therefore, it’s best to choose a rotor with the widest possible range of adapter compatibility.
A horizontal rotor allows centrifugal particles to settle at the bottom of the tube rather than along the sloping walls. However, horizontal rotors typically operate at much lower speeds compared to fixed-angle rotors of the same model—sometimes failing to meet the demands of high-speed centrifugation. For微量 samples that require both high-speed centrifugation and sedimentation at the bottom of the tube, a bucket-shaped rotor is an ideal choice. In this type of rotor, the tubes are horizontally fixed in a bracket housed within an aesthetically unappealing “round cookie box” design. This configuration enables centrifugation at relatively high speeds (up to 14,000 rpm) while ensuring that the particles remain concentrated at the bottom of the tube.