Centrifugal force and relative centrifugal force of a centrifuge

The phenomenon in which an object moves away from the center of a circle when a centrifuge is rotating is called centrifugal motion, or simply centrifugal effect.

2013-01-29


High-speed benchtop centrifuge technology for separating serum lipoproteins

Electrophoresis has proven particularly effective for separating fractions with high apolipoprotein content (HDL and VHDL), whereas centrifugation is more suitable for separating serum lipoproteins of various densities.

2013-01-24


Centrifuge Operation Procedure in Biochemical Experiments

For routine biochemical tests, use a low-speed centrifuge when separating serum; the rotation speed should be around 3,000 to 5,000 rpm. Typically, this process takes no more than 3 minutes.

2013-01-23


The A/H1N1 influenza can be experimentally detected using a medical centrifuge.

In response to the recent H1N1 influenza outbreak, Shanghai Luxiangyi Centrifuge Manufacturer—specializing in the production of laboratory centrifuges—provides experimental and testing centrifuge equipment for hospitals and research institutions.

2013-01-23


The application of biological centrifuge separation and culture techniques in bacteriological diagnosis

Centrifuges are typically used to separate samples by centrifugation. The centrifugal separation and culture technique for bacteria is an important and fundamental procedure in bacteriological diagnosis.

2013-01-22


Operating and Usage Procedure for High-Speed Refrigerated Centrifuges

For example, the TGL-20M high-speed refrigerated centrifuge has a maximum rotor speed of 20,000 rpm; however, if the centrifuge is too old, the speed must be reduced accordingly. Try not to set the rotor speed or time too high.

2013-01-22


Laboratory Centrifuge Operation and Maintenance Procedures

During ultracentrifugation, the liquid must completely fill the centrifuge tubes. If vacuum is required during ultracentrifugation, only by filling the tubes completely can tube deformation be avoided. If the centrifuge tube caps have poor sealing, the tubes should not be filled to capacity to prevent leakage, which could interfere with the proper functioning of the sensor.

2013-01-21


Causes of Imbalance in Medical Centrifuge Rotors

During sample loading into medical centrifuge tubes, if the tubes are overfilled with sample liquid or the tube caps are not tightly screwed shut, the high-vacuum environment within the centrifuge chamber during centrifugation can cause the tubes to flatten, rupture, and leak sample liquid. This imbalance can lead to rotor instability, resulting in shaft bending or even shaft breakage accidents.

2013-01-17


The refrigerated centrifuge is used to analyze the blood of patients with influenza A.

Arriving at the blood centrifugation room, the blood that had been stripped of white blood cells was placed into a medical refrigerated centrifuge. The reporter observed that the machine looked just like a washing machine: after the blood was loaded inside, the staff member pressed the switch, and the machine began to spin. Seven minutes later, the blood in the blood bag had already separated into distinct layers.

2013-01-16


How should vibration be controlled when using a high-speed centrifuge?

Accidents caused by improper user operation occur repeatedly. The Lu Xiangyi centrifuge from Shanghai is equipped with an imbalance protection feature: once the rotor's vibration exceeds a certain threshold upon startup, the centrifuge automatically slows down and shuts down. However, centrifuges with this feature can sometimes fail to trigger the alarm correctly, leaving the possibility of accidents unmitigated.

2013-01-15


< 1...113114115...128 >