Frozen Centrifuge Maintenance and Servicing Instructions

9 Guidelines for the Maintenance and Care of Refrigerated Centrifuges

2012-01-05


Laboratory Centrifuge Nitrogen Explosion-Proof Protection Requirements

The Lu Xiangyi centrifuge employs an improved nitrogen protection system. The design incorporates an online oxygen detection device and a pressure transmitter sensor to monitor the oxygen concentration within the centrifuge’s chamber during operation, enabling quantitative control and ensuring that the oxygen content remains within a safe range.

2012-01-04


Operation and Maintenance of Low-Speed Refrigerated Centrifuges

The Luxiangyi DDL5M low-speed refrigerated centrifuge, in addition to the typical structural and functional features of conventional centrifuges, is equipped with systems for refrigeration, vibration reduction, and instrument control. Clinically, it is primarily used for separating, precipitating, and concentrating sample solutions to extract components of different densities from the sample.

2012-01-04


Notice Regarding the Dismissal of Liu Min, an Employee of Lu Xiangyi

Our company employee Liu Min has not returned to work since going home after October 1, 2010. After deliberation by the company, we have decided to terminate her employment contract and remove her from the company’s records. Her work QQ account, 413658812, is hereby invalidated as well.

2011-12-30


A low-speed centrifuge is used for autologous cell wrinkle-reduction surgery.

PRP autologous cell rejuvenation is a well-established clinical cosmetic procedure that has been extensively clinically validated and proven effective. Moreover, since the raw material is derived from the patient’s own blood, it does not trigger rejection or allergic reactions.

2011-12-29


Overview of the Applications of Multi-Tube Low-Speed Centrifuges

Centrifugal separation technology is a new technique developed based on the behavior of particles under practical centrifugal forces. Particles of different densities, sizes, or shapes settle at different rates in a centrifuge; thus, a generally spherical, non-homogeneous mixture can be separated by centrifugation. Centrifuges are used for further biochemical research and for the large-scale separation of various substances.

2011-12-29


A Brief Analysis of Maintenance Methods for Low-Speed Benchtop Refrigerated Centrifuges

Properly record the operating status and duration of each centrifuge run, document the causes of instrument malfunctions and their troubleshooting methods in a timely manner, and ensure that the instrument operates in an ideal condition.

2011-12-28


Centrifugal separation technique for isolating biological T lymphocytes

Principle: When a suspension of mononuclear cells is passed through a nylon wool column, B cells, plasma cells, monocytes, and certain helper cells are selectively retained on the nylon fibers, while most T cells pass through the column. This makes it an effective method for obtaining a T-cell-enriched population.

2011-12-28


Technique for separating red blood cells using a low-speed centrifuge

Centrifuge the sample using a horizontal rotor centrifuge at 2,000 rpm for 20 minutes. After centrifugation, you will observe that the sample has separated into multiple layers: the bottom layer consists of red blood cells, the middle layer is the layered liquid, and the top layer is plasma. Between the plasma layer and the layered liquid, there is a thin, relatively dense white layer—the mononuclear cell layer.

2011-12-28


A method for separating gel-like proteins from serum using a refrigerated centrifuge

The gel-like substance formed during serum separation in a centrifuge is fibrin. After blood collection, do not centrifuge immediately; instead, you can place the sample in a 37°C water bath for a few minutes, or let it sit at room temperature for a while. If possible, use a clot-promoting tube or a separator gel tube.

2011-12-28