A method for separating gel-like proteins from serum using a refrigerated centrifuge

Release time:

2011-12-28


Overview:

The gel-like substance formed during serum separation in a centrifuge is fibrin. After blood collection, do not centrifuge immediately; instead, you can place the sample in a 37°C water bath for a few minutes, or let it sit at room temperature for a while. If possible, use a clot-promoting tube or a separator gel tube.

The gel-like substance formed during serum separation in a centrifuge is fibrin. After blood collection, do not centrifuge immediately; instead, you can place the sample in a 37°C water bath for a few minutes, or let it sit at room temperature for a while. If available, you can use a clot-promoting tube or a separator gel tube.

Coagulation tubes are primarily used for collecting blood samples in biochemical and immunological tests in medical laboratories. They feature a wide operating temperature range, a specially treated inner wall that is exceptionally smooth, and a high-quality coagulant evenly distributed across the inner surface of the tube. Once blood samples enter the tube, they come into full contact with the coagulant, enabling complete blood clotting within 5 to 6 minutes. Centrifugation then yields high-quality serum, effectively addressing issues such as hemolysis, clot lysis, and fibrin precipitation caused by red blood cell aggregation. This makes the tubes ideal for rapid outpatient and emergency serum biochemical testing. The complete clot retraction time is between 20 and 25 minutes; centrifugation speed should be maintained at 3,500 to 4,000 rpm, with a centrifugation duration of 5 minutes. The tubes can be stored under simple conditions at temperatures ranging from 4°C to 25°C.

The separation gel tubes are primarily used for serum biochemistry, immunology, drug testing, and other similar applications. The inner wall of these tubes is uniformly coated with a procoagulant, which significantly shortens the blood clotting time. Since the introduced separation gel is a pure substance, it exhibits highly stable physicochemical properties and excellent resistance to high temperatures, effectively preventing the gel from decomposing or deforming during storage and transportation. After centrifugation, the separation gel solidifies to form a barrier that completely separates the serum from blood cells, effectively blocking any exchange of substances between them, thus yielding high-quality serum. This ensures more accurate test results, improves the efficiency of serum collection, and maintains serum stability for over 48 hours without significant changes in its biochemical properties or chemical composition, allowing direct use on analytical instruments. The complete blood clot retraction time is 20 to 25 minutes; the recommended centrifugation speed is 3,500 to 4,000 rpm, with a centrifugation duration of 5 minutes. Simple storage conditions include temperatures ranging from 4°C to 25°C.