Simple Maintenance Methods for Medical Centrifuges
The operator of a medical refrigerated centrifuge must ensure that the critical components of the centrifuge are in good condition, specifically: the motor is securely suspended and stable; the rotor and accessories show no signs of corrosion; the spindle is free from any deviation; screw connections are tight and secure; and the grounding system is functioning properly.
2012-01-13
Centrifuge rotors for freezing are typically made of aluminum alloy. Once corroded, their strength diminishes, making them prone to accidents. Aluminum alloys are susceptible to liquid corrosion; after cleaning, they should be dried thoroughly using a hairdryer or by inverting them for a period of time. Only after confirming that they are completely dry can they be put into use.
2012-01-12
Maintenance of Speed Faults in Desktop Centrifuges
During the experiment with a desktop centrifuge, the motor speed may be too slow and the carbon brushes may produce significant sparking. In such a situation, what steps should be taken?
2012-01-12
2012-01-11
Material specifications for commonly used centrifuge rotors
The material for centrifuge rotors should be chosen from those with high specific strength (strength-to-density ratio)—for convenience in dimensional calculations, we’ll continue to use density here. The primary materials with high specific strength include aluminum alloys, titanium alloys, and carbon fiber.
2012-01-11
Essential Details for Selecting a High-Speed Centrifuge
Laboratory centrifuges are primarily selected based on two factors—rotational speed and capacity—depending on the workload.
2012-01-10
Rules and Precautions for Using Low-Speed Centrifuges
Many commonly used low-speed centrifuges have also found their way into laboratories. In corporate and academic research institutions, low-speed laboratory centrifuges with rotational speeds around 3,000 rpm are already quite common—for example, the TD5GL benchtop filtration centrifuge and the TD5A benchtop low-speed centrifuge.
2012-01-10
Key Considerations for Selecting a Low-Speed Benchtop Centrifuge for a Biology Lab
Commonly used instruments and equipment in biological laboratories include: aseptic chamber, ultra-clean workbench, triple-distilled water distiller, vacuum pump, steam sterilizer, electric heated constant-temperature incubator, cultureware, CO2 incubator, constant-temperature water bath, inverted microscope, low-speed benchtop centrifuge, sterile filter, washing apparatus, and cell counter.
2012-01-09
How to Choose a Desktop Low-Speed Centrifuge
The low-speed benchtop centrifuge is one of the most commonly used basic pieces of equipment, widely employed in hospital laboratories. It is an indispensable tool for tasks such as separating serum from blood, precipitating formed cells, concentrating bacteria, and performing PCR tests, among others.
2012-01-09
High-capacity centrifuge technology for separating blood cells
Centrifuge the liquid at 2,000 rpm; the cells at the bottom of the tube are mononuclear cells.
2012-01-08