Characteristics of Five Commonly Used Rotor Types for Centrifuges

The rotational speed of a centrifuge rotor is related to the material and strength of the rotor. Generally, ultra-hard aluminum alloy (LC4), which has high strength and light weight, is used. For ultrahigh-speed centrifuges, titanium alloy (TiC4) is employed.

2012-09-20


Methods for vibration reduction in laboratory centrifuges

The centrifuge’s operating speed is kept well away from the critical speed of the rotating system. Passive vibration isolation involves using various types of vibration dampers to isolate potential vibrations from the machine frame and foundation.

2012-09-19


The Role of Brushless Motors in Laboratory Centrifuges

In the past, motors were DC motors equipped with carbon brushes. During operation, these carbon brushes wore down, producing sparks, noise, and even vibrations. Moreover, carbon brushes had a limited lifespan, requiring replacement before the motor could resume operation. Even more serious was the pollution caused by carbon dust generated from brush wear—this not only contaminated the centrifuge itself but also spread to the surrounding environment. Such contamination is entirely unsuitable for the healthcare industry.

2012-09-16


Common models of centrifuges routinely used in hospital laboratories.

Typically, when we purchase low-speed centrifuges for hospital laboratories, we often lack a clear understanding of the specific parameter configurations and model types that we need. Here, the author would like to provide a brief introduction for those who are planning to purchase centrifuges.

2012-09-14


Shanghai Luxiangyi Centrifuge Partners with Alibaba to Develop Overseas Markets

Alibaba, a domestic and international e-commerce platform for foreign trade, has carefully created an international sales platform for Lu Xiangyi’s centrifuges (website: http://lxylxj.en.alibaba.com/).

2012-09-12


Key considerations for selecting a laboratory centrifuge

When selecting a laboratory centrifuge, we should consider the following five aspects. For a standard centrifuge, you only need to choose based on two factors: rotational speed and capacity, depending on the workload.

2012-09-06


Iran’s use of tabletop centrifuges to enrich uranium is for peaceful purposes.

There are more than 1,000 centrifuges at the Fordow nuclear facility, of which 700 are currently operational. Iran has informed the International Atomic Energy Agency that the country plans to eventually install 3,000 machines at the Fordow nuclear facility.

2012-08-30


Standard for Safely Selecting a High-Speed Refrigerated Centrifuge

Another aspect of the mechanical safety design for centrifuges is that, in the event of the rotor “exploding” at its maximum operating speed, no fragments must be ejected outside the machine, and the cover must not be lifted open. The above points constitute the criteria for the safe selection of centrifuges.

2012-08-21


Operation and Use of Low-Speed Centrifuges

Among these, low-speed centrifuges (including high-capacity centrifuges) and high-speed refrigerated centrifuges are the most widely used and are essential tools in biochemical laboratories for the separation and preparation of biomacromolecules. During experiments, filtration and centrifugation are commonly employed to separate precipitates from the supernatant.

2012-07-24


Maintenance Work for Low-Speed, High-Capacity Centrifuge Components

Proper operation and reasonable maintenance are key to ensuring the normal functioning of low-speed, high-capacity centrifuge instruments and extending their service life.

2012-07-23


< 1...116117118...127 >