Causes of Imbalance in Medical Centrifuge Rotors

During sample loading into medical centrifuge tubes, if the tubes are overfilled with sample liquid or the tube caps are not tightly screwed shut, the high-vacuum environment within the centrifuge chamber during centrifugation can cause the tubes to flatten, rupture, and leak sample liquid. This imbalance can lead to rotor instability, resulting in shaft bending or even shaft breakage accidents.

2013-01-17


The refrigerated centrifuge is used to analyze the blood of patients with influenza A.

Arriving at the blood centrifugation room, the blood that had been stripped of white blood cells was placed into a medical refrigerated centrifuge. The reporter observed that the machine looked just like a washing machine: after the blood was loaded inside, the staff member pressed the switch, and the machine began to spin. Seven minutes later, the blood in the blood bag had already separated into distinct layers.

2013-01-16


How should vibration be controlled when using a high-speed centrifuge?

Accidents caused by improper user operation occur repeatedly. The Lu Xiangyi centrifuge from Shanghai is equipped with an imbalance protection feature: once the rotor's vibration exceeds a certain threshold upon startup, the centrifuge automatically slows down and shuts down. However, centrifuges with this feature can sometimes fail to trigger the alarm correctly, leaving the possibility of accidents unmitigated.

2013-01-15


Solution to the Bearing Heating Problem in Centrifuge Motors

Whether it's an industrial centrifuge or a laboratory centrifuge, the most critical component is the drive assembly, and bearings are an essential part of this drive assembly. Typically, experienced centrifuge purchasers will ask manufacturers a series of questions about bearings when buying a centrifuge.

2013-01-14


A low-temperature, high-capacity centrifuge is used to test blood safety.

The equipment includes a rapid biochemical testing device, a rapid hemoglobin testing device, a dedicated blood-weighing scale, a specialized blood-storage refrigerator, a quick-freezing refrigerator, a low-temperature blood-storage refrigerator at -30℃, and a low-temperature high-capacity centrifuge.

2013-01-14


The Correct Installation Procedure for Laboratory Centrifuges

Centrifuge rotors are typically made of aluminum alloy. Once corroded, their strength diminishes, making them prone to accidents. Aluminum alloys are susceptible to liquid corrosion; after cleaning, they should be dried thoroughly using a hairdryer or by inverting them for a period of time. Only after confirming that they are completely dry should they be put into use.

2013-01-10


Malaysia has developed the first small-scale beam centrifuge.

This centrifuge is equipped with a color digital camera and a high-speed flash unit. The images of the equipment in operation captured by these devices can be directly stored on a computer, and real-time operational images can also be displayed on an LCD monitor in the control room.

2013-01-04


Vibration Reduction Technology for High-Speed Centrifuges Commonly Used in Laboratories

In centrifuge design, active and passive vibration reduction are typically applied simultaneously. For high-speed centrifuges, vibration reduction is generally considered in three distinct areas:

2012-12-25


Classification of Commonly Used Centrifuges in Laboratories

Based on the different rotational speeds used, centrifuges are commonly classified into two types: high-speed centrifuges and low-speed centrifuges. Centrifuges with a rotation speed of 10,000 rpm or lower are considered low-speed centrifuges, while those exceeding 10,000 rpm are classified as high-speed centrifuges. Depending on requirements for capacity and temperature control, we further divide them into large-capacity refrigerated centrifuges and high-speed refrigerated centrifuges.

2012-12-23


< 1...113114115...127 >