The promising development trend of centrifuges hinges on energy equipment.

Release time:

2020-07-20


Overview:

A centrifuge is a DC adjustable-speed motor. In centrifuge maintenance, the speed adjustment is achieved by using an adjustable resistor to vary the firing angle of the thyristor, which in turn controls the rectified voltage applied across the motor terminals, thereby enabling precise control of the motor speed.

   Centrifuge It is a DC adjustable-speed motor. In centrifuge maintenance, the speed of the motor is adjusted by varying the conduction angle of the thyristor through an adjustable resistor. The thyristor then controls the rectified voltage applied to the motor terminals, thereby enabling precise speed control. If the motor speed is unstable, the following four potential causes—analyzed from a theoretical standpoint—could all be responsible. First, the adjustable resistor itself may be at fault. Since the adjustable resistor is mounted on the control panel and subjected to very high usage frequency, it’s quite common for its contacts to become unreliable after prolonged use. Second, the thyristor itself is prone to various issues, typically including breakdown and short circuits, open circuits, failure to trigger properly, or internal contact problems. Third, one of the four rectifier diodes might be defective. Fourth, there could be carbon dust between the motor rotor and the commutator, or poor contact caused by the carbon brushes themselves.

  Centrifuges are widely used in the medical field. At the microscopic level, cells and DNA molecules both require high-speed medical centrifuges for separation and research. Such high-speed centrifuges typically operate at speeds ranging from over 5,000 to under 60,000 revolutions per minute, generating centrifugal forces tens of thousands of times greater than Earth's gravitational acceleration, thereby enabling the separation of tiny molecular components. For blood separation, a centrifuge operating at 3,000 revolutions per minute is usually sufficient; currently, most manufacturers can produce such equipment, and it has proven highly effective in practical applications. In contrast, centrifuges used in pharmaceutical purification and refining processes are generally low-speed models, with rotational speeds below 3,000 rpm. These centrifuges have large processing capacities and, to meet GMP standards and requirements in pharmaceutical production, are typically constructed from stainless steel.

  Over the past two years, the domestic pharmaceutical industry’s demand for centrifuges has been gradually shifting toward the mid-to-high-end market. Although overall market growth has been relatively slow recently, the market share of high-precision, intelligent centrifuges is steadily increasing. The proportion of the mid-to-high-end market has risen to over 60%, and the entire industry is rapidly advancing toward higher speed, greater precision, increased intelligence, and greater environmental friendliness.

  Supported by key industries such as energy equipment, the domestic centrifuge industry has shown some promising trends in its industrial and product structures: For instance, new advances have been made in production-line manufacturing technologies and application fields. As one of the most widely used and extensively deployed types of manufacturing equipment, machining centers are evolving toward greater functional integration and higher speeds and precision. Mid- to high-end equipment is now entering the micro- and nano-era; smart technologies are being widely adopted; and the environmentally friendly pharmaceutical machinery industry is rapidly developing, emerging as a crucial technology and an important product in intelligent manufacturing and industrial automation.

  It is worth noting, however, that the technological level of China’s current centrifuge industry has yet to reach maturity and still lags significantly behind that of foreign countries. This is mainly reflected in the fact that China’s industry continues to face issues such as an unreasonable industrial structure, fragmented operations, and insufficient technological sophistication. These factors indicate that China’s pharmaceutical equipment industry is still in a stage of development and will require a long period of further growth and refinement before it can fully mature.

  Domestic high-end products still largely rely on imports, and the market share of domestic brands remains low. It can be said that high-precision pharmaceutical machinery equipment will become the industry’s development trend.

  Shanghai Luxiangyi Centrifuge Instrument Co., Ltd. is one of China’s leading centrifuge manufacturers. In the current Chinese centrifuge industry, which is characterized by a mix of high-quality and low-quality players, Shanghai Luxiangyi Centrifuge Instrument Co., Ltd. remains committed to providing cost-effective, high-quality products and continues to increase its R&D investment to further enhance product quality.

  Due to the stringent regulations in the pharmaceutical industry, pharmaceutical centrifuges are predominantly of the flat-plate, sealed type. To minimize potential contamination or damage and enhance hygiene, the parts that come into contact with materials are made of stainless steel or entirely constructed from stainless steel. The entire machine features no sanitary dead spots, ensuring cleanliness and ease of use. This type of centrifuge has now become widespread throughout the pharmaceutical industry. Combined with smaller centrifuges—around 3,000 rpm—used for blood separation, these machines form a complete low-speed industrial centrifuge system and have also found applications in other industries related to biopharmaceuticals. Such centrifuges must comply with national GMP standards before they can be used.