Why blood collection tubes are not recommended for use as centrifuge tubes.

Release time:

2020-11-12


Overview:

Common centrifuges found in hospitals include low-speed centrifuges, which are mainly used in the clinical laboratory, and high-speed refrigerated centrifuges. The latter, however, are used less frequently than the former. So today, we’ll focus on centrifuges used for blood collection and testing, with a particular emphasis on distinguishing between centrifuge tubes and blood collection tubes.

  Hospitals have many uses for centrifuges—not just for blood collection and testing.

  For example, irrigation fluid specimens, urine sediment smears, and so on.

  Common centrifuges found in hospitals include: Low-speed centrifuge Primarily used in the clinical laboratory, there’s also a high-speed refrigerated centrifuge. Compared to the former, this one is used less frequently.

  So today, let’s talk again about centrifuges used for blood collection and testing, with a particular focus on distinguishing between centrifuge tubes and blood collection tubes.

  The vacuum blood collection device consists of three main components: a vacuum blood collection tube, a blood collection needle (including straight needles and scalp-type needles), and a needle holder. The vacuum blood collection tube is the device's primary component and is primarily used for collecting and preserving blood samples. During manufacturing, a predetermined amount of negative pressure is pre-set in the vacuum blood collection tube. Once the blood collection needle penetrates a vein, the negative pressure inside the tube automatically draws blood into the tube. At the same time, various additives are pre-loaded into the tube, enabling it to meet the requirements of multiple comprehensive clinical blood tests. As a revolutionary innovation over the traditional syringe-based blood-collection method, the vacuum blood collection device offers advantages such as safety, airtightness, convenient transportation, and distinct color coding for easy identification. It provides rapid and accurate blood collection in clinical settings.

  Actually, hospital blood collection tubes come in different types, and you can tell them apart by the color of their caps.

  1. Green-top tubes: The tubes contain lithium heparin, a mucopolysaccharide containing sulfate groups that carries a strong negative charge. It enhances the inactivation of serine proteases by antithrombin III, thereby inhibiting thrombin formation and exerting various anticoagulant effects, including preventing platelet aggregation.

  2. Red-head tube: The inner wall of the tube is uniformly coated with silicon dioxide to prevent adhesion, and a coagulation accelerator has been added. This accelerator activates fibrinogen, converting soluble fibrin into insoluble fibrin polymers, thereby forming a stable fibrin clot.

  3. Citrate-EDTA Tube: The tube contains ethylenediaminetetraacetic acid and its salts (EDTA-), an amino polycarboxylic acid that effectively chelates calcium ions in the blood. By removing calcium from the reaction site, EDTA inhibits and terminates both endogenous and exogenous coagulation processes, thereby preventing blood clotting. Compared with other anticoagulants, EDTA has minimal effects on red blood cell aggregation and red blood cell morphology. Therefore, EDTA salts (2K, 3K, 2Na) are commonly used as anticoagulants.

  4. Blue-top tubes: These tubes contain sodium citrate, which exerts an anticoagulant effect by chelating calcium ions in the blood sample. The National Committee for Clinical Laboratory Standards (NCCLS) recommends a concentration of either 3.2% or 3.8%. The recommended ratio of anticoagulant to blood is 1:9. These tubes are primarily used for testing components of the fibrinolytic system (prothrombin time, thrombin time, activated partial thromboplastin time, and fibrinogen).

  5. Dark-Headed Tube: The tube contains sodium citrate at concentrations of 3.2% (0.109 mol/L) and 3.8%. The ratio of anticoagulant to blood volume is 1:4. Typically used for erythrocyte sedimentation rate (ESR) testing, if the anticoagulant proportion is excessively high, the blood will be diluted, which can accelerate the ESR.

  The above was an explanation of blood collection tubes. Next, let’s take a look at centrifuge tubes.

54.png

  Centrifuge tubes come in various capacities, with the most commonly used being 1.5 ml, 2 ml, 5 ml, 15 ml, or 50 ml. The smallest type (250 µl) can also be used as a PCR tube. Centrifuge tubes do not necessarily need to be sterile, nor are they always PCR tubes.

  Moreover, when operating the centrifuge, be sure not to exceed 2 percent of the total volume of the centrifuge tube. The purpose of this restriction is twofold: first, to prevent liquid overflow; and second, to reduce the centrifugal force and thereby protect the centrifuge itself. When the rotor of a centrifuge spins at high speed, if the density of suspended particles is greater than that of the surrounding medium, the particles will move away from the axis of rotation and begin to settle. Conversely, if the particle density is lower than that of the surrounding medium, the particles will move toward the axis of rotation and start to float. In addition to the centrifuges commonly used in hospitals, laboratories employ various types of centrifuges. Generally, low-speed centrifuges have a maximum rotational speed of no more than 6,000 rpm, while high-speed centrifuges operate at speeds below 25,000 rpm. Ultracentrifuges, on the other hand, can reach maximum speeds of over 30,000 rpm. In all these operations, it is essential to adhere strictly to the above-mentioned guidelines.