A Brief Discussion on the Establishment and Management Experience of Blood-Compatibility Testing Laboratories

Release time:

2015-03-03


Overview:

Basic instruments and equipment required for the blood bank: (1) 1–2 refrigerators for blood banking (4+2℃), used for storing blood and patient specimens. (2) 1–2 benchtop centrifuges dedicated to blood banking. (3) 1 incubator set at 37℃, used for holding patient specimens to allow separation of serum by centrifugation. (4) 1–2 low-temperature freezers (-30℃), used for storing cryoprecipitate, fresh frozen plasma, as well as backup standard sera and polybrene reagents. (5) 1–2 ordinary microscopes, used for observing blood typing results and crossmatching outcomes.

The crucial role of blood banks (blood transfusion units) in today’s clinical practice is beyond doubt. However, most grassroots hospitals, due to constraints such as human resources and material resources, have not established formal blood transfusion departments and instead integrate blood bank or blood transfusion unit functions into their laboratory departments. At Grade II-A hospitals, the average monthly blood usage is around 150 bags (60,000 ml). Below, I’ve summarized my management experience.

1. Blood Bank Hardware Configuration

1.1 Basic Instruments and Equipment Required for the Blood Bank: (1) 1–2 refrigerators for blood bank use (4+2℃), used for storing blood samples and patient specimens. (2) 1–2 low-temperature refrigerators (-30℃), used for storing cryoprecipitate, fresh frozen plasma, as well as backup standard sera and polybrene reagents. (3) 1 incubator at 37℃, used for placing patient specimens to allow separation of serum by centrifugation. (4) 1–2 benchtop centrifuges dedicated for blood typing. (5) 1–2 ordinary microscopes, used for observing blood group identification and crossmatching results.

1.2 Basic Requirements for the Blood-Grouping Room: (1) Blood must be stored in a refrigerator specifically designated for blood-grouping purposes; household refrigerators cannot be used as substitutes. The reason is that refrigerators used in blood-grouping rooms maintain a more stable temperature and are equipped with high- and low-temperature alarms as well as temperature-recording devices. Once the temperature exceeds the specified range, an alarm will sound, preventing blood from spoiling or blood components from being damaged within the refrigerator. (2) Walls, floors, and ceilings must be smooth, easy to clean, resistant to liquid leakage, immune to chemical corrosion, and capable of being disinfected. (3) Lighting should be tailored to each specific procedure, avoiding glare that could cause interference. (4) A reliable power supply system must be in place to ensure adequate electricity for essential equipment such as incubators and refrigerators. (5) A dedicated telephone line for blood requests should be available to guarantee prompt communication with the blood bank in emergency situations.

2 Blood Transfusion Documentation Records

All documentary records must be kept by designated personnel to prevent loss and damage, ensuring they are readily available for verification. (1) Patient Specimen Receiving Logbook. (2) Patient Blood Type Testing Logbook. (3) Pre-Transfusion Physical Examination Record Book. (4) Blood Inbound and Outbound Logbook. (5) Patient Adverse Reaction to Transfusion Record Book. (6) Refrigerator Temperature Logbook for the Blood Bank. (7) Shift Handover Logbook for the Blood Bank. (8) Ultraviolet Disinfection Logbook.

3 Blood Bank Management Document System

3.1 The SOP document is crucial to the operation of the blood bank. On the one hand, it standardizes the procedures performed by staff; on the other hand, it also promotes the development of software systems in the blood compatibility testing laboratory.

The most important among them is:
(1) Blood Type Identification Operating Procedures.
(2) Crossmatching Procedure (Saline Method).
(3) Polybrene crossmatching procedure.
(4) Blood registration system.
(5) Pre-transfusion inspection system and blood quality inspection system.
(6) Blood type testing and verification system.
(7) Clinical Blood Transfusion Verification System.
(8) Clinical blood-use application and blood-reserve system.
(9) Adverse transfusion reaction reporting system.

Next is the departmental management system, which primarily includes:
(1) Blood Matching Room Work System.
(2) Blood Storage Management System.
(3) Blood Bank Work Plan.
(4) Emergency Response System for Blood Bank Crises.
(5) Rational blood management methods.
(6) Blood Registration System.
(7) Working System of the Blood Transfusion Committee.
(8) Medical safety work system.
(9) Quality Control System for the Blood Bank.

3.2 Relevant Laws and Regulations

(1) The Blood Donation Law of the People's Republic of China.
(2) The Regulations on Blood Donation by Citizens of Shanxi Province.
(3) Management Measures for Clinical Blood Use in Medical Institutions.
(4) Clinical Blood-Use Technical Specifications.
(5) Criminal Law of the People's Republic of China (Abstract).
(6) Law of the People's Republic of China on Prevention and Control of Infectious Diseases (Summary).

4 Personnel Management

All staff members have received specialized medical training and possess both medical expertise and experience in blood transfusion and related work. Before taking up their posts, they undergo training provided by the Shanxi Provincial Health Department and are awarded qualification certificates. Prior to starting work, staff members undergo medical examinations and receive either active or passive immunization that is valid. Pregnant women, who are susceptible to blood-borne diseases, are not permitted to work in the blood bank. Staff members receive regular training, during which the importance of strictly adhering to operating procedures for blood typing and crossmatching is repeatedly emphasized. Blood typing must be performed twice as a double-check, and at least two personnel must be present when conducting crossmatching. Finally, the results must be confirmed by microscopic examination.

In addition, documentation must be completed carefully. When drawing blood, both the blood collector and the blood issuer must record the information simultaneously and sign their names. Experimenters should use ballpoint pens to fill out the original records; handwriting must be neat and legible, and no non-standard simplified characters or codes may be used. Alterations are not permitted without authorization. If corrections are necessary, the corrected sections must be signed or stamped with a correction seal. The experimental records shall be filled out by the primary person responsible for the experiment. Other personnel involved in the experiment must carefully review and correct any errors before signing their names personally under the experimenter’s name. The original records shall be kept securely by the experimenters themselves and must not be damaged or lost. Without the approval of the director of the blood compatibility testing laboratory, neither the original records nor the conclusions may be disclosed to external parties.

5. Daily Work Management

(1) Strictly comply with the relevant provisions of the "General Principles for Disinfection and Isolation Management." (2) The layout should be rational: the blood storage and distribution area should be located in the clean zone, while the blood testing and processing room should be situated in the contaminated zone. The office should be set up in the semi-contaminated zone. (3) Management and operations must be carried out strictly according to the procedures stipulated in the "Administrative Measures for Clinical Blood Use in Medical Institutions" and the "Clinical Blood Transfusion Technical Specifications" issued by the Ministry of Health. (4) Maintain a clean environment; clean desks and floors daily. Surfaces contaminated by blood should be wiped with a chlorine-containing disinfectant solution at a concentration of 1,000 mg/L. (5) Blood storage refrigerators must be dedicated for this purpose and regularly cleaned and disinfected. Conduct biological monitoring of the refrigerator’s inner walls monthly. (6) Staff members must undergo regular medical checkups, and gloves must be worn whenever handling blood. After removing gloves, wash hands thoroughly. In case of skin contamination or sharp-object injuries, immediate treatment is required. (7) Discarded single-use medical supplies, waste blood, and blood-contaminated materials must be collected separately and either incinerated or treated by soaking them in a chlorine-containing disinfectant solution at a concentration of 1,000 mg/L. (8) Promptly collect and report records of transfusion reactions on a monthly basis. Keep accurate records of blood entering and leaving the facility and report these statistics monthly. (9) Cooperate with the hospital’s Clinical Blood Management Committee, ensuring proper management of both whole blood and blood component use within the hospital. Carry out educational activities and evaluate the blood usage practices of clinical departments.

6. Communicating with clinicians

Clinicians are the ones who know their patients’ conditions best, and it is crucial to maintain close communication with them before and after blood transfusions. Our department primarily strengthens its collaboration with clinical departments through the following measures: (1) Preparing blood in advance for elective patients. (2) When encountering special or rare blood types, we first notify the local blood bank to actively prepare the necessary blood supplies; at the same time, we inform the patient’s immediate family members to go to the blood bank and donate blood themselves (since the probability of finding identical blood types among immediate family members is relatively high). Additionally, we promptly inform the attending clinicians to adopt temporary measures, such as using plasma substitutes or volume-expanding agents. (3) When the blood bank does not have the specific blood type required by a patient, we patiently explain the situation to both the clinician and the patient’s family, avoiding any cold, rigid, or dismissive attitudes. (4) Regularly conducting hematology lectures in clinical departments—this not only enriches clinicians’ knowledge about blood usage but also allows us to promptly gather feedback from the clinical staff.

7 Discussion

With the advancement of medicine, clinical laboratories have made significant progress in various aspects, including personnel, equipment, technology, and working environment. However, how to make the most of limited resources and ensure high-quality laboratory operations remains a top priority, especially for departments whose testing technologies and equipment are relatively underdeveloped. The Department of Laboratory Medicine has leveraged its existing resources to establish a blood compatibility testing room and has continuously improved and refined its management mechanisms.