Requirements for rotational speed of handheld centrifuges

Release time:

2015-11-17


Overview:

Requirements for rotational speed of handheld centrifuges
  As China’s centrifuge market becomes increasingly open, more and more centrifuge manufacturers have emerged domestically, offering a wide variety of products with diverse models and specifications. Handheld centrifuge For example, some domestic manufacturers now produce handheld centrifuges whose technological content is no longer significantly different from that of similar foreign products; in fact, they even enjoy a price advantage in the market. As a result, the market prospects for handheld centrifuges are once again viewed favorably. Next, the editor will provide a detailed introduction to help you understand how to choose the appropriate rotational speed for handheld centrifuges.
  First, let’s take a look at how centrifuges are classified. Based on their maximum rotational speeds, centrifuges can be divided into low-speed centrifuges, high-speed centrifuges, and ultrahigh-speed centrifuges. Each type of centrifuge has its own rated maximum rotational speed—the maximum rotational speed refers to the speed at which the centrifuge operates under no-load conditions. Specifically, low-speed centrifuges can reach speeds of up to 10,000 rpm/min; high-speed centrifuges can achieve speeds ranging from 10,000 rpm/min to 30,000 rpm/min; and ultrahigh-speed centrifuges can even exceed 30,000 rpm/min. However, these are merely theoretical maximum speeds. Depending on the type of rotor used and the mass of the sample being processed, the actual definition of maximum rotational speed may vary. Let me give you an example: If a centrifuge is rated at 16,000 rpm/min, that means it can theoretically reach this speed under no-load conditions. But in practice, once a sample is loaded into the centrifuge, the actual rotational speed will certainly be lower than 16,000 rpm/min.
  Generally speaking, Handheld centrifuge Multiple rotors can be equipped, but currently in China, only a handful of manufacturers possess this technology. For example, the TG16 benchtop high-speed centrifuge can accommodate up to 16 different types of rotors, enabling it to serve multiple purposes. The horizontal rotor can reach speeds of up to 15,000 rpm, while the angle rotor can achieve approximately 14,000 rpm. Therefore, when selecting a centrifuge speed, it’s crucial to ensure that the maximum speed of the chosen centrifuge exceeds the target speed. Generally speaking, the separation effect depends more on centrifugal force than on rotational speed itself. Thus, even if the rotational speed doesn’t quite meet the specified requirement, as long as the centrifugal force meets the standard, the desired experimental outcome can still be achieved.