The pocket-sized centrifuge—a small body with a big impact.

Release time:

2015-11-18


Overview:

Handheld centrifuge
   Handheld centrifuge As the name suggests, this centrifuge is compact and exquisite, boasting a uniquely distinctive shape. Its key advantage lies in its compact size. This type of centrifuge is widely used for collecting microorganisms, cellular debris, whole cells, large organelles, sulfate precipitates, and immunoprecipitates, among other materials. It can reach speeds of over 20,000 rpm. In addition to featuring the performance and structure typical of pocket-sized centrifuges, all angular rotors used in this centrifuge are made from titanium alloy and aluminum alloy. The centrifuge tubes are rigid polyethylene plastic products with caps. Furthermore, the centrifuge is equipped with a vacuum system.
  The drive belt of the handheld centrifuge is open, with only a protective cover installed at the motor end—this design primarily aims to enhance operational safety from a safety standpoint. However, it does not control the dust generated by friction, which can pollute the environment. Consequently, using such a centrifuge in cleanrooms is impractical. Therefore, it is essential to seal off the drive belt’s operating area to prevent the leakage of friction-generated dust. A handheld centrifuge is a machine that generates centrifugal force, which depends on the rotor radius, rotational speed, and sample mass: F = Rmω² (where F is the centrifugal force; R is the radius; m is the sample mass; and ω is the rotational speed). Centrifugal force is one of the most important parameters for evaluating a centrifuge’s performance and also serves as a key criterion for distinguishing between different centrifuge models. When a centrifuge leaves the factory, its maximum centrifugal force is specified.
  However, there are still performance differences between handheld centrifuges and laboratory benchtop centrifuges. To ensure more accurate experiments, extend the lifespan of the instrument, and guarantee the safety of personnel, we’ve summarized the following key points that need to be noted:
  1. The voltage of the external power supply system must be compatible. Handheld centrifuge Since most work is conducted in outdoor environments, extra attention must be paid to voltage issues, and a good grounding wire is required.
  2. The centrifuge should always be kept in a horizontal position, because microcentrifuges are small and lightweight. When not operated in a horizontal position, they tend to shake easily, which may cause them to malfunction or even lead to accidents.
  3. Regularly inspect and maintain all aspects of the machine’s performance, as most microcentrifuges operate outdoors and are prone to vibration during transportation, which can affect instrument accuracy.
  4. The samples must be balanced, and when using a centrifuge tube for centrifugation, both the centrifuge tube and the sample must be balanced simultaneously. The centrifuge tubes used in handheld centrifuges are extremely small—meaning that the instrument can tolerate only very small balance errors, which is far less than what larger centrifuges can handle. Therefore, microcentrifuges must achieve precise balancing.
  5. If any abnormal phenomena are detected during the centrifugation process, immediately turn off the power and notify the manufacturer for inspection and repair.
  This type of handheld centrifuge features a relatively simple structure and can be categorized into two types: small desktop models and floor-standing models. It is equipped with an 888真人 device comprising a drive motor, speed regulator, timer, and other components, making it easy to operate. Gently and smoothly turn the speed-regulating knob (taking about 1 to 2 minutes) until you reach the desired rotational speed; start timing only after the speed has stabilized. Once centrifugation is complete, slowly return the knob to the zero position. Handheld centrifuge The rotational speed generally does not exceed 4,000 rpm, and the maximum capacity is 2–4 L. It is the most commonly used laboratory instrument for large-scale primary separation and extraction of biomacromolecules, precipitates, and other substances.