Operation and Key Points for Producing Fish Liver Oil Using a Centrifuge

Release time:

2014-07-01


Overview:

Heat the mixture to 80℃ and hydrolyze for 1–2 hours until the liver paste turns black and becomes non-viscous. Then, sieve the mixture to remove impurities such as liver residue. Transfer the resulting liquid into an insulated pot and maintain the temperature at 80℃. Use a centrifuge to separate the hydrolysate and obtain liver oil.

Fish oil refers to oils derived from fish, including both fish body oil and fish liver oil. Fish fats primarily consist of mixed triglycerides, a composition shared with most animal and vegetable oils. A distinguishing feature is that fish oil contains a higher proportion of highly unsaturated fatty acids compared to typical terrestrial animal and vegetable oils. As a result, fish oil is extremely susceptible to oxidation in air, leading to rancidity and spoilage. Among these highly unsaturated fatty acids, eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) are active compounds that help lower high blood lipid levels and thus possess significant medicinal value. In addition, fish liver oil contains varying amounts of vitamin A and vitamin D, making it an ideal raw material for the production of pharmaceutical-grade fish liver oil.

  The production of aquatic animal fats and oils mostly uses the stored fats of animals—namely, subcutaneous fat layers, fat layers along the abdominal wall, fat embedded in muscle tissues, and fat found in the liver—as raw materials. Fish oil is primarily extracted from fatty fish. Cod liver oil is mainly obtained from cod and sharks. Marine mammal oils are derived from various species of whales, dolphins, and other marine mammals. Fish oil is a byproduct generated during the manufacture of fishmeal; typically, a combined pressing process is employed. After the raw materials have been steamed and pressed, crude oil is separated from the pressurized liquid and then further refined through separation and clarification to yield fish oil. Cod liver oil is generally produced using steam cooking, mild alkali digestion, or solvent extraction methods. The fats and oils found in the blubber, bones, and internal organs of marine mammals are usually directly extracted by heating. To extract whale oil, the subcutaneous fat is first cut into blocks or mashed into a paste, then subjected to pressure or thermal dissolution under vacuum conditions. To isolate spermaceti from sperm whale oil, the whale oil is cooled to around 0°C, allowing solid wax to crystallize out; the wax is then separated from the liquid oil by pressing. Before being put into use, aquatic animal fats and oils undergo refining processes tailored to their specific applications, including cold filtration, alkali refining, decolorization, deodorization, and hydrogenation.

  Key Operational Points for Fish Oil Production

Fish livers typically contain high levels of lipids, known as fish liver oil. Among these, vitamins A and D are important natural medicinal resources. Currently, the fish liver oil products exported mainly consist of milky-white liver oil.

Fish liver oil extraction

  The industrial extraction of fish liver oil primarily employs a dilute alkaline hydrolysis method. In this process, a dilute alkaline solution is used to break down the protein tissues in the fish liver, disrupting the bond between the proteins and the fish liver oil, thereby enabling the separation of the oil. The key points of the extraction process are as follows:

    ① The raw materials for fish liver oil production mainly include fresh fish livers such as shark liver, mackerel liver, and yellow croaker liver. These can be pre-stored by salting or refrigeration. When using the salting method, the fish livers must have their gallbladders removed, be washed thoroughly with cold water, cut into small pieces, mixed evenly with 10–30% salt, and then packed into barrels. When using the refrigeration method, if the storage period is short, ice or ice-salt mixtures can be used for preservation; however, if the storage period is longer, the livers must be stored in a cold storage facility at -15℃.

    ② Finely chop fresh liver or partially desalted salted liver into a paste.

    ③ Transfer the liver paste into the hydrolysis pot, add an appropriate amount of water, and heat it to 40℃. Then, add a dilute alkaline solution to bring the pH of the hydrolysate to 9–10.

④ Continue heating to 80℃ and carry out hydrolysis for 1–2 hours until the liver paste turns black and becomes non-viscous. Then, sieve the mixture to remove impurities such as liver residue, transfer the liquid into an insulated pot, and maintain the temperature at 80℃. Use a centrifuge to separate the hydrolysate and obtain liver oil.

    ⑤ Add approximately 15% saline solution for salting-out, with the salting-out temperature set at 80℃, to separate proteins and other impurities.

    ⑥ After salting-out, the liver oil is washed several times with hot water at 80℃ until the wash water becomes neutral. This step removes the solid fats with high melting points from the crude fish liver oil, thereby preventing crystallization during cold seasons. The crude oil is gradually cooled: first pre-cooled to 7–10℃ for about 7 days, then further cooled to -2–4℃ for more than 3 days, bringing the core temperature of the crude oil down to 0–1℃. Under these temperature conditions of 0–1℃, the crude oil is subjected to pressure filtration to produce refined, clear oil.

    ⑦ The medicinal purified cod liver oil obtained by cold filtration has varying vitamin contents depending on the raw materials used, and thus cannot meet the requirements of the Pharmacopoeia. Therefore, a certain amount of vitamin A and vitamin D must be added, or the oil must be diluted with a specific quantity of refined vegetable oil to achieve the desired appropriate concentration.