The medical centrifuge employs an advanced rotating dynamic design.
Release time:
2015-09-02
Overview:
Medical centrifuge Rotors typically operate at extremely high speeds. When the centrifugal force acting on the rotor exceeds the tensile strength of the rotor material or when the rotor material contains internal defects, the rotor may explode, damaging equipment and endangering the safety of operators. Therefore, each rotor has a maximum allowable operating speed. The rotor’s automatic identification and overspeed protection functions verify the rotor by scanning the barcode on its surface, thereby eliminating the possibility of operator errors or uncontrolled centrifuge operation leading to rotor overspeed. Moreover, the rotor’s information is automatically entered into and stored in a microcomputer, enabling continuous monitoring of the rotor’s service life.
The comprehensive safety system of the medical centrifuge includes an electronic door lock, a chamber door constructed from steel structure, and a three-layer safety enclosure. It also features automatic rotor identification and overspeed protection, a dynamic imbalance detector for rotors, and overtemperature protection for the centrifuge chamber. Some centrifuges are equipped with a self-diagnosis system that continuously monitors all functions of the centrifuge, directly displays the location of any faults, and issues alarm signals, making maintenance and repair more convenient. The drive section employs permanently lubricated bearings and a forced-closed, self-lubricating design, ensuring that the main unit remains undamaged even in the event of an unexpected power outage and automatically restarting once power is restored.
The longevity of a medical centrifuge is directly related to its materials. Therefore, when selecting a centrifuge, it’s essential to have a good understanding of its materials. The strength of the materials used in medical centrifuges is reflected in the centrifuge’s rotational speed. These factors directly affect both volumetric flow rate and mass flow rate. Medical centrifuge The corrosion resistance is also related to the structure of its internal components. For example, rotating drums and screw conveyors are typically cast and welded from stainless steel, or made from high-strength stainless steel and titanium alloys; alternatively, they can be manufactured using fiberglass-reinforced plastic. Currently, both domestically and internationally, major components of such equipment are predominantly made from stainless steel—particularly the rotating drum and the screw conveyor, where entire sections are made of stainless steel. Only a few foreign manufacturers can select appropriate materials based on the specific requirements of different waste types and media. For instance, for wastewater treatment and non-corrosive environments, high-strength carbon steel with anti-corrosion coatings is employed. As for the outer casing, efforts are made to minimize material usage and reduce costs—for example, by using a fiberglass-reinforced plastic casing. To effectively protect the rotating drum, wear-resistant sleeves are installed at the slag discharge ports, and reinforcing ribs are added to both the inner and outer surfaces of the drum, or grooves are machined into the inner surface.
In recent years, researchers have employed methods such as flow-field separation, finite-element simulation, large-gradient density grading, and anti-modal analysis to study the operational performance and key components of medical centrifuges, providing a theoretical basis for designing centrifuges with superior performance. To enhance product purity and meet energy and environmental protection requirements, high-performance parameters have become a defining feature in the development of centrifuges.
The horizontal screw medical centrifuge with a high separation factor features an advanced rotating dynamic design. Its main bearings are mounted elastically, which helps extend the service life and reduce noise and vibration. To enhance the centrifuge’s performance, strength, rigidity, wear resistance, and corrosion resistance, a range of new materials—including engineering plastics, cemented carbides, and wear- and corrosion-resistant stainless steels—have been incorporated into its design. With the advancement of automatic control and sensor technologies, numerous sophisticated automated control methods have been introduced, enabling comprehensive monitoring of various operational parameters in medical centrifuges, such as temperature, flow rate, speed, amplitude, and noise levels. Sensors collect this data and transmit it to a computer, where it is processed by the system, allowing operators to promptly detect changes in these parameters and take appropriate corrective actions. As market competition intensifies, manufacturers face significant challenges in enhancing customer value. Since the 1990s, mass customization has gradually gained momentum in manufacturing, enabling the production of goods and delivery of services with efficiency approaching that of mass production while meeting customers’ personalized needs.
Medical centrifuge Centrifugation is a specialized technique that uses centrifugal force to separate, concentrate, and analyze substances based on differences in their sedimentation coefficients, diffusion coefficients, and buoyant densities. Centrifugation is closely related to experiments involving bacteriophage infection of cells, experimental evidence for semi-conservative DNA replication, the preparation of pectinase and chicken blood cell lysate, the separation of hemoglobin solutions, various cellular organelles, and cell fusion.