The production team for centrifuges is steadily growing, presenting a promising and bright outlook.

Release time:

2017-06-27


Overview:

  In recent years, science and technology have continued to develop. Centrifuge The application scope of centrifuges is becoming increasingly broad, driving growing demand for these machines. As a result, the centrifuge industry is experiencing rapid development, with an ever-expanding workforce dedicated to centrifuge production, presenting a highly promising outlook. However, both the process technology and technical level of domestic centrifuge equipment remain relatively lagging behind. Consequently, companies often resort to price wars in order to gain market share. Yet, the fundamental path for the development of centrifuge enterprises lies in technological innovation and quality enhancement. With the implementation of the new GMP standards in China, the requirements for centrifuges will continue to rise, making it imperative to drive the industry toward greater intelligence.
  Currently, electric centrifuges are commonly used in laboratories. Electric centrifuges rotate at high speeds, so it’s important to pay close attention to safety. In particular, you must take precautions to prevent the centrifuge from moving or even falling off the lab bench during operation—this can happen if the load becomes unbalanced or if the tube holders have aged. Additionally, be careful to ensure that the lid is securely closed; otherwise, vibrations could cause the centrifuge tubes to rupture, sending glass fragments flying around and potentially leading to accidents. Therefore, when using a centrifuge, you must pay close attention to the following operational guidelines.
  (1) The bottom of the centrifuge tube sleeve must be padded with cotton or a test-tube pad.
  (2) If the electric centrifuge makes noise or the machine body vibrates, immediately disconnect the power supply and promptly troubleshoot the issue.
  (3) Centrifuge tubes must be placed symmetrically in the rotor to prevent vibration of the machine. If there is only one sample tube, the other tube should be replaced with an equal mass of water.
  (4) When starting the centrifuge, you must first close the top cover before slowly starting it up.
  (5) After separation is complete, first secure the centrifuge. Only after the centrifuge has come to a complete stop may you open the centrifuge lid and remove the sample. Do not use external force to forcibly stop the centrifuge from rotating.
  (6) The centrifugation time is generally 1 to 2 minutes; during this period, the experimenter must not leave to attend to other tasks.
   Centrifuge Installation requirements:
  1. Before and after equipment installation, careful attention must be paid to storage. Ensure that the motor, electrical control devices, and hydraulic system are protected from moisture, and all components are safeguarded against corrosion. Also, take care to protect the machine’s exterior surfaces.
  2. During installation, safety must be carefully observed to prevent the machine from being damaged by collisions.
  3. Equipment and other devices installed adjacent to the centrifuge must be positioned with sufficient space for operation and maintenance, and there must be a pedestrian walkway at least 1 meter wide around the main body of the centrifuge. Above the main body of the centrifuge, there must be a clearance of at least 2 meters for disassembly, assembly, and maintenance. When installing and positioning the electrical control cabinet and hydraulic system, adequate space for disassembly, assembly, and maintenance must also be reserved to prevent damage to the equipment or malfunctions in case of abnormalities.
  4. The electrical cabinet should be placed in a dry, well-ventilated, and non-corrosive environment with adequate ventilation. The control console should be installed next to the main unit for easy observation and operation.
  5. The centrifuge must be installed horizontally, with the base platform’s top surface serving as the reference plane. When pouring the foundation, follow the foundation drawing provided by our company. The foundation weight should be approximately three times the machine’s weight. In addition to bearing the machine’s static load, the foundation also withstands the dynamic load generated during machine operation (the dynamic load is about 0.5 times the machine’s weight).
  6. The machine is generally installed as a complete unit and must not be disassembled. If disassembly for maintenance is absolutely necessary, it must be inspected and approved by technicians from the manufacturer. Only after passing inspection can the machine be put into operation.
  7. Since centrifuges generate slight vibrations during operation, pipelines connected to the centrifuge (such as exhaust pipes and outlet pipes) must use flexible connections. The connection points should be sealed or insulated. A three-phase power supply should be used to prevent electric shock accidents.
  8. The diameter of the external liquid discharge pipe must not be smaller than the diameter of the centrifuge’s liquid discharge port, it must be free of blockages, and it should be positioned lower than the height of the discharge port to ensure smooth liquid flow.
   Centrifuge Application areas It is becoming increasingly widespread and is also being well-applied in medical laboratories. They are indispensable and powerful tools in biological research techniques, including studies on biomacromolecules, organic macromolecules, subcellular structures, proteins, nucleic acids, and more.