Idealized Centrifuge Control Technology

Release time:

2015-08-18


Overview:

Centrifuge
   Centrifuge There is a cylindrical drum that rotates at high speed around its own axis, known as the rotor, which is typically driven by an electric motor. After a suspension (or emulsion) is introduced into the rotor, it is rapidly set in rotation at the same speed as the rotor itself. Under the action of centrifugal force, the various components of the mixture separate and are discharged separately. Generally, the higher the rotational speed of the rotor, the better the separation effect. The operating principles of centrifuges fall into two categories: centrifugal filtration and centrifugal sedimentation. Centrifugal filtration involves using the centrifugal pressure generated in the centrifugal force field to exert a force on the filter medium, allowing the liquid to pass through the medium as filtrate while solid particles are retained on the surface of the filter medium, thereby achieving liquid-solid separation. Centrifugal sedimentation, on the other hand, exploits the principle that components of a suspension (or emulsion) with different densities will rapidly settle and stratify under the influence of the centrifugal force field, thus enabling liquid-solid (or liquid-liquid) separation.
The electric motors typically used in centrifuges are series-wound motors. Such a motor consists of two main parts: the stator and the rotor. The stator comprises a centralized, fixed magnetic pole made up of an iron core and magnetic field windings. The rotor is composed of an iron core, rotor windings, and a commutator. The function of the brushes is to serve as critical components that connect the stator windings to the rotor windings via the commutator. The operating principle of the series-wound motor's circuit is as follows: current flows from the power source through the stator’s magnetic field windings, then via the brushes and through the commutator into the rotor windings, and finally returns to the power source via the brushes and the stator’s magnetic field windings, thus forming a closed circuit. The magnetic field windings and the rotor windings are connected in series through the commutator and brushes. Since the current is the same at every point in the circuit, the motor can operate normally at the desired speed only if the series circuit remains unobstructed and free of any blockages.
  A centrifuge utilizes the powerful centrifugal force generated by the high-speed rotation of its rotor to accelerate the sedimentation rate of particles in a liquid, thereby separating substances in a sample that differ in their sedimentation coefficients and buoyant densities. When a suspension containing fine particles is left undisturbed, the particles gradually settle downward under the influence of the gravitational field. The heavier the particle, the faster it sinks; conversely, particles with a density lower than that of the liquid will rise to the surface. The rate at which particles move under gravity depends on their size, shape, and density, as well as on the strength of the gravitational field and the viscosity of the liquid. Particles on the order of red blood cell size—typically several micrometers in diameter—can have their sedimentation processes observed even under normal gravitational conditions.
   Centrifuge Before an incident occurs, individuals often experience unusual conditions, as internal faults typically develop gradually from minor issues into major ones. On-duty personnel should continuously monitor and review the operational status. By observing changes in sounds, vibrations, odors, discoloration, temperature, and internal conditions during operation, they can identify any abnormalities, analyze the causes, locations, and severity of these abnormal operations, and then take appropriate measures accordingly.
  (1) Review whether the oil temperature at the lower layer of the centrifuge exceeds the permitted range.
  (2) Inspect the oil quality: It should be transparent and slightly yellowish. This can be used to determine whether the oil is of good or poor quality.
  (3) The bushing should be inspected for cleanliness, cracks, and discharge marks. The cooling system should be functioning properly.
  (4) The centrifuge’s acoustic response is normal. During normal operation, some individual units may produce a steady hum-like electromagnetic noise.
  (5) When weather conditions change, a special review should be conducted with particular emphasis.
  The selection of a centrifuge must involve a comprehensive analysis based on factors such as the size and concentration of solid particles in the suspension (or emulsion), the density difference between solids and liquids (or between two liquids), liquid viscosity, the characteristics of the filter cake (or sediment), and the specific separation requirements. This analysis ensures that the centrifuge meets the desired moisture content of the filter cake (sediment) and the clarity of the filtrate (separated liquid), allowing for an initial choice of the appropriate centrifuge type. Subsequently, the specific type and specifications are determined according to the processing capacity and the level of operational automation required, and finally validated through practical trials. Generally speaking, for suspensions containing particles larger than 0.01 millimeters, filtration-type centrifuges are suitable; for suspensions with fine particles or particles that can be compressed or deformed, sedimentation-type centrifuges are preferable; and when the suspension has a low solid content, very small particles, and high demands for liquid clarity, separation-type centrifuges should be chosen. Future trends in centrifuge development will focus on enhancing separation performance, developing larger-scale models, improving discharge mechanisms, and introducing specialized and combined rotor designs. Centrifuge Strengthen research on separation theory and develop idealized control technologies for centrifugal separation processes.