The hydrophilic material of the high-speed centrifuge effectively interfaces with the gradient medium.
Release time:
2017-06-16
Overview:
The material of high-speed centrifuge tubes is best hydrophilic. If hydrophobic centrifuge tubes are used, some salt can be added to ensure that the gradient solution flows down evenly when it is introduced.
High-speed centrifuge It boasts advantages such as an attractive appearance, high capacity, compact size, light weight, low noise, minimal vibration, and timed control. It is suitable for centrifugal separation and sedimentation applications in the production of plasma, serum, urea, and vaccines. With the advancement and expansion of molecular biology and genetic engineering research and applications, centrifugal separation technology has undergone several generations of evolution—from low-speed centrifuges, to high-speed centrifuges, ultra-high-speed centrifuges, and finally to ultrahigh-speed refrigerated centrifuges and ultra-large-capacity refrigerated centrifuges.
A high-speed centrifuge spins a centrifuge tube containing a heterogeneous mixture of particles at high speed in a benchtop, high-capacity refrigerated centrifuge. Particles of different sizes and densities will migrate toward the bottom of the centrifuge tube at their respective sedimentation rates. By carefully controlling the rotational speed and duration, the particles with the highest sedimentation rate will settle at the bottom of the tube first, while those with intermediate and lower sedimentation rates will remain suspended in the supernatant. By transferring the supernatant into another centrifuge tube, increasing the rotational speed, and allowing it to spin for a specific duration, one can collect the fraction with intermediate sedimentation rates. By repeating this process multiple times, it is possible to achieve the separation of different components within the mixture.
The high-speed centrifuge drive system consists of a motor, a drive shaft, and a vibration-damping mechanism. It employs an AC variable-frequency motor, a sealed, pre-lubricated drive shaft, and a vibration-damping mechanism that effectively reduces vibration and noise during centrifuge operation. When preparing gradient samples using a concave gradient in a high-speed centrifuge—contrary to the convex gradient—the heavier-phase liquid will flow into the centrifuge tube first from the mixing chamber. During preparation, the lighter-phase liquid must be carefully layered on top gradually; therefore, the needle needs to be raised at an appropriate speed. In most cases, it is sufficient simply to tilt the centrifuge tube at a certain angle and gently place the needle at the tube’s opening, allowing the solution to slowly flow down along the tube wall and gradually spread out. After completing the addition, the centrifuge tube should then be placed upright for further processing. At this stage, it is important to note that the selected... High-speed centrifuge The material of centrifuge tubes is best hydrophilic. If the centrifuge tubes are hydrophobic, you can add some salt to ensure that the gradient solution flows down evenly when it’s introduced.
Selection of Gradient Media for High-Speed Centrifuges:
(1) Salt-gradient medium.
(2) Small-molecule organic compounds such as sucrose.
(3) Benzene derivatives of triiodide.
(4) Organic polymers.
(5) Colloidal silica.
Density range of the high-speed centrifuge gradient:
(1) In rate-zonal centrifugation, the density of the medium is lower than the densities of the various particles in the sample.
(2) In density-gradient centrifugation, the density of the medium is greater than the densities of the various particles in the sample.
Capacity of the high-speed centrifuge gradient:
Refers to the maximum number of samples that a gradient medium can accommodate, provided that the separation requirements are met.
(1) Related to the composition of the sample and separation requirements.
(2) It is related to the overall volume of the gradient, its slope, and the viscosity of the medium.
(3) It is related to the rotational speed and rotor configuration.
To ensure the stability of the density gradient and sample bands, the density of the sample added to the top of the density gradient column must be lower than the density at the top of the gradient liquid. Otherwise, the sample will collapse through the gradient until it reaches the isopycnic zone. High-speed centrifuge During this process, the sample layer will visibly expand, and the settling of entrained droplets will lead to a decrease in band resolution.
A high-speed centrifuge spins a centrifuge tube containing a heterogeneous mixture of particles at high speed in a benchtop, high-capacity refrigerated centrifuge. Particles of different sizes and densities will migrate toward the bottom of the centrifuge tube at their respective sedimentation rates. By carefully controlling the rotational speed and duration, the particles with the highest sedimentation rate will settle at the bottom of the tube first, while those with intermediate and lower sedimentation rates will remain suspended in the supernatant. By transferring the supernatant into another centrifuge tube, increasing the rotational speed, and allowing it to spin for a specific duration, one can collect the fraction with intermediate sedimentation rates. By repeating this process multiple times, it is possible to achieve the separation of different components within the mixture.
The high-speed centrifuge drive system consists of a motor, a drive shaft, and a vibration-damping mechanism. It employs an AC variable-frequency motor, a sealed, pre-lubricated drive shaft, and a vibration-damping mechanism that effectively reduces vibration and noise during centrifuge operation. When preparing gradient samples using a concave gradient in a high-speed centrifuge—contrary to the convex gradient—the heavier-phase liquid will flow into the centrifuge tube first from the mixing chamber. During preparation, the lighter-phase liquid must be carefully layered on top gradually; therefore, the needle needs to be raised at an appropriate speed. In most cases, it is sufficient simply to tilt the centrifuge tube at a certain angle and gently place the needle at the tube’s opening, allowing the solution to slowly flow down along the tube wall and gradually spread out. After completing the addition, the centrifuge tube should then be placed upright for further processing. At this stage, it is important to note that the selected... High-speed centrifuge The material of centrifuge tubes is best hydrophilic. If the centrifuge tubes are hydrophobic, you can add some salt to ensure that the gradient solution flows down evenly when it’s introduced.
Selection of Gradient Media for High-Speed Centrifuges:
(1) Salt-gradient medium.
(2) Small-molecule organic compounds such as sucrose.
(3) Benzene derivatives of triiodide.
(4) Organic polymers.
(5) Colloidal silica.
Density range of the high-speed centrifuge gradient:
(1) In rate-zonal centrifugation, the density of the medium is lower than the densities of the various particles in the sample.
(2) In density-gradient centrifugation, the density of the medium is greater than the densities of the various particles in the sample.
Capacity of the high-speed centrifuge gradient:
Refers to the maximum number of samples that a gradient medium can accommodate, provided that the separation requirements are met.
(1) Related to the composition of the sample and separation requirements.
(2) It is related to the overall volume of the gradient, its slope, and the viscosity of the medium.
(3) It is related to the rotational speed and rotor configuration.
To ensure the stability of the density gradient and sample bands, the density of the sample added to the top of the density gradient column must be lower than the density at the top of the gradient liquid. Otherwise, the sample will collapse through the gradient until it reaches the isopycnic zone. High-speed centrifuge During this process, the sample layer will visibly expand, and the settling of entrained droplets will lead to a decrease in band resolution.