Centrifuges with different rotational speeds have different application ranges.

Release time:

2017-09-27


Overview:

   Centrifuge Generally, store the device in a dry location away from direct sunlight. Since centrifuges generate significant heat, avoid stacking clutter around them and keep a clearance of at least 10 cm from walls, baffles, and other non-breathable, poor-heat-dissipating objects. Additionally, it’s best to place the centrifuge in a separate room by itself, and never store organic reagents or flammable materials nearby.
  A centrifuge is a mechanical device that uses centrifugal force to separate the components of a mixture consisting of liquids and solid particles or of two immiscible liquids. Centrifuges are primarily used to separate solid particles from liquids in suspensions; or to separate two immiscible liquids of different densities from an emulsion (for example, to extract cream from milk). They can also be used to remove liquid from wet solids—for instance, to spin-dry wet clothes in a washing machine. Special high-speed tubular separators can even separate gas mixtures of different densities. Leveraging the principle that solid particles of varying densities or particle sizes settle at different rates in a liquid, some sedimentation centrifuges can also classify solid particles according to their density or particle size.
  Precautions
  1. The centrifuge must be placed on a level, stable surface or experimental bench and must not be tilted.
  2. Centrifuge The grounding wire should be connected to ensure safety.
  3. After the centrifuge is started, if any abnormal noise or vibration occurs, it could be due to a broken centrifuge tube or an imbalance in weight between two tubes positioned opposite each other. In such cases, the machine should be immediately shut down and addressed.
  4. The rotational speed must be increased and decreased smoothly and gradually. After turning off the power, wait for the centrifuge to come to a complete stop automatically. Do not use your hands or any other objects to forcibly stop the centrifuge.
  5. Inspect the motor’s brushes and bearings for wear once a year, and replace them if necessary. Note that the brush model must be identical. When replacing, clean any dirt from the brush holder and the commutator surface. The new brushes should drop freely into the brush holder. The brushes must fit snugly against the outer circumference of the commutator. If the bearings are low on oil or contaminated, they should be cleaned and lubricated. Use molybdenum disulfide lithium-based grease for bearing lubrication. The amount of grease to add is typically half of the bearing’s clearance.
  Centrifuges have a very wide range of applications, and the scope of application varies depending on the centrifuge's rotational speed. Centrifuge By leveraging the differences in sedimentation rates of various substances in a centrifugal force field, sample analysis and separation can be achieved. This technique is widely used in fields such as biomedicine, chemical engineering, petroleum, agriculture, food hygiene, pharmaceuticals, mineral processing, coal mining, water treatment, and shipbuilding.