High-speed refrigerated centrifuges boost scientific research and experiments, enhancing experimental efficiency.
Release time:
2017-06-07
Overview:
High-speed refrigerated centrifuge It can be used with various rotor types and integrates vacuum, high speed, and cooling functions in one unit. It enables rapid separation of a wide range of samples, including cells, subcellular organelles, bacteria, and viruses, thereby facilitating the isolation of nucleic acids, proteins, cells, and nanomaterials. This instrument meets the experimental needs of researchers in our institute’s related fields such as animal science, food science, and life sciences.
When using a high-speed refrigerated centrifuge, the liquid in the centrifuge tubes must not exceed two-thirds of the total tube capacity; otherwise, the liquid may easily spill over. Before and after use, be sure to check whether there are any residual liquid leaks inside the rotor and keep it dry. When changing rotors, make sure that the spindle of the centrifuge and the rotor’s locking mechanism are securely engaged. After starting the centrifugation, do not leave the machine until the centrifugal speed has reached the preset value. High-speed refrigerated centrifuge Once an abnormality is detected in the centrifuge (such as imbalance causing significant vibration or excessive noise), immediately press the STOP button. If necessary, directly turn off the power by pressing the power switch to stop the centrifuge and identify the cause.
The interface-moving method for high-speed refrigerated centrifuges can employ a single-sector cup and utilize a Schlieren optical system. After filling the analytical cell with the biomacromolecule sample solution, under the action of the centrifugal force field, the biomacromolecules migrate away from the gas-liquid meniscus within the cell, allowing their sedimentation rates to be determined. If the sample is a protein solution, it can be prepared at a concentration of 1 mg/mL; prior to being introduced into the analytical cell, the sample should undergo dialysis against a buffer solution. A second single-sector cup, used for balancing, is filled with the buffer solution. High-speed refrigerated centrifuge The curved surface of the moon should be at the same height as the sample filling cup. The centrifugal speed should be selected such that the target protein molecules can completely settle to the bottom of the chamber within 1.5 to 2 hours.
Based on the current usage of high-speed refrigerated centrifuges at our institute’s experimental center, two large-scale instruments are being utilized at a relatively high rate. These instruments are employed for preparing animal serum, separating soybean protein, concentrating animal viruses (such as Newcastle disease virus and infectious bursal disease virus), purifying EV71 virus via sucrose density gradient centrifugation, and centrifuging nanomaterials. Such applications span multiple disciplines including veterinary medicine, food processing, biochemistry, and life sciences, fully maximizing the efficiency of these centrifuges and effectively meeting the experimental needs of related academic fields.
The centrifuge tubes commonly used in laboratories for high-speed refrigerated centrifuges are made of either plastic or glass. Plastic tubes are more common, while glass tubes are fragile and cannot be used in high-speed or high-speed refrigerated centrifuges. Plastic centrifuge tubes are made from materials such as polypropylene, polycarbonate, and polyethylene. Plastic centrifuge tubes are either transparent or translucent. High-speed refrigerated centrifuge The centrifugation status of the sample can be observed directly, but it is relatively easy to deform and has poor resistance to organic solvents, resulting in a shorter service life.