The advantages and differences between a decapping centrifuge and a conventional centrifuge
Release time:
2013-07-05
Overview:
The cap-removal centrifuge is a standard laboratory centrifuge widely used in various fields such as clinical medicine, biochemistry, immunology, blood banks, pharmaceutical research and education, and manufacturing. The cap-removal centrifuge is also known as the vacuum blood-collection-tube-specific cap-removal centrifuge.
The key advantage of a decapping centrifuge over a conventional centrifuge lies in:
(1) During centrifugation, the cap of the vacuum blood collection tube is automatically removed, improving work efficiency.
(2) Replace manual cap removal to prevent reagents from coming into contact with the human body.
Installation Precautions
(1) The countertop must be solid and level to prevent the decapping centrifuge from vibrating or shifting during operation.
(2) The power supply must have a dedicated ground wire; it is strictly prohibited to share the neutral wire with the ground wire to prevent electric shock injuries.
(3) The area around the decapping centrifuge should be free from corrosive gases and electromagnetic interference to prevent premature failure of the instrument’s surface protective coating and interference with electrical components.
(4) Place the decapping centrifuge on a level surface, ensuring that the four rubber feet bear an even load.
Rules of Use
1. After centrifugation is complete, remove the rotor from the decapping centrifuge and place it upside down on the experimental bench. Wipe dry any remaining water inside the chamber, and leave the centrifuge lid open.
2. Place the rotor lid either on the centrifuge’s platform or on the lab bench. Under no circumstances should you leave it floating loosely on the rotor without tightening it securely, because if the centrifuge is accidentally started, the rotor lid could fly off and cause an accident!
3. After tightening the rotor cover, be sure to use your fingers to check for any gaps between the rotor and the rotor cover. If there is a gap, loosen and retighten the cover until you confirm that there are no gaps before starting the centrifuge.
4. During the centrifugation process, operators must not leave the centrifuge room. In the event of an abnormal situation, operators must not turn off the power supply (POWER); instead, they should press STOP.
5. Do not use substandard or counterfeit centrifuge tubes; do not use centrifuge tubes that are aged, deformed, cracked, or fail to meet quality standards.
6. During holidays and in the evening, the last staff member to use the centrifuge must conduct a routine safety inspection before leaving.
7. If the instrument malfunctions or any components are damaged during use, please contact us—the manufacturer of Luxiangyi centrifuges—immediately. Under no circumstances should you attempt to disassemble the instrument yourself.