Conversion between Laboratory Centrifuge Speed and Centrifugal Force

Release time:

2013-04-25


Overview:

The separation factor on a centrifuge refers to the relative centrifugal force.

1. The meaning of the separation factor:
The ratio of the distribution coefficients of two solutes under the same conditions within the same extraction system. The larger (or smaller) the separation factor, the better the separation effect between the two solutes; when the separation factor equals 1, the two solutes become indistinguishable. On a centrifuge, the separation factor refers to the relative centrifugal force.


2. Main factors affecting separation:
Centrifugal force: The centripetal force causes an object to experience an attraction, repulsion, or any tendency toward a central point. The centripetal force operates in an inertial reference frame, whereas the centrifugal force is a fictitious force that arises in a non-inertial reference frame. When we solve physics problems, we typically work within an inertial frame (where Newton's laws hold true), so we generally don't need to use the concept of centrifugal force. Since these are fundamentally different concepts, we cannot compare their directions or magnitudes.
F = mω²r
ω: Angular velocity of rotation (radians/second) r: Distance of the rotating body from the axis of rotation (cm) m: Mass of the particle
Relative centrifugal force (RCF)
RCF is the factor by which the actual centrifugal force is converted into gravitational acceleration.
g represents the acceleration due to gravity (9.80665 m/s²).
Since one full rotation corresponds to 2π radians, the angular velocity of the rotor is expressed in terms of the number of rotations per minute (rotations per minute, or r/min): In general, low-speed centrifugation is typically reported in units of r/min.

3. Separation factor calculation formula:
RCF = Centrifugal force / Gravitational force = mω²r / mg = ω²r / g = (2πr / r × rpm)² × r / g Note: rpm should be converted to revolutions per second.
For example: A centrifuge with a diameter of 1000 mm and a rotational speed of 1000 rpm has a separation factor of:
RCF(1000) = (2 × 3.1415 × 16.667)^2 × 0.5 / 9.8
= 104.72² × 0.5 / 9.8
=560