A cream separator is used for the storage and processing of bovine colostrum.
Release time:
2012-11-01
Overview:
The milk produced within three days after a cow gives birth is called colostrum. Cow colostrum is rich in nutrients, especially immune factors and growth factors, which give it health-promoting properties. Typically, a cow produces about 43.5 kg of colostrum during the first three days after calving. Assuming that a calf consumes 11 kg of this colostrum, each cow is left with 32.5 kg of surplus colostrum, which can be processed and utilized.
1. Storage of bovine colostrum
If bovine colostrum is improperly stored, it may undergo deterioration characterized by layering, off-flavors, and increased acidity, which in turn reduces the digestibility and absorption rate of immunoglobulins. Refrigeration or freezing can effectively extend the shelf life of bovine colostrum, ensuring that its nutritional components, pH level, and acidity remain essentially unchanged.
2. Preparation of Bovine Colostrum Immunoglobulin Concentrate (MIG)
Bovine colostrum immunoglobulin concentrate can provide the special nutritional requirements—higher protein and energy levels—needed by low-birth-weight premature infants, particularly by replenishing the essential immunoglobulins they require. The processing method is as follows:
Cool the raw milk to between 8°C and 12°C, then separate it using a cream separator to remove blood cells, other somatic cell debris, and coarse impurities. Next, heat the milk and centrifuge it again to remove the milk fat. If processing cannot be carried out promptly, the resulting skimmed milk can be frozen at -25°C for storage without any loss of antibody activity.
Heat the skimmed milk to 56℃ in a plate heat exchanger, transfer it to an insulated tank, and hold it at this temperature for 30 minutes. Then cool it down to 37℃, add acid to adjust the pH to 4.5, or add rennet to coagulate the casein. Next, heat the skimmed milk again to 56℃ and hold it at this temperature for 10 minutes; during this step, whey will begin to separate out. Rinse the casein curds twice with deionized water, centrifuge them to remove the casein, and obtain a clear supernatant. Filter the whey and the clear supernatant separately using either a Seitz-type or a Filtrox-type filter to remove fine casein particles and prevent equipment blockage during ultrafiltration.
Through the ultrafiltration process, lactose, minerals, and water are removed, resulting in a final concentrate with a dry matter content of 10%, a total protein content of 7% to 8%, and an immunoglobulin content of 2% to 3%. After sterile filtration, low-temperature concentration, and freeze-drying, the final concentrate becomes an immunoglobulin concentrate. This ingredient is easily mixed with milk powder and readily dissolves in water or liquid milk for infant consumption.
3. Processing of bovine colostrum powder
Bovine colostrum powder is produced by removing the fat from bovine colostrum, adding heat-stable substances and other excipients permitted for use in food products, and then using a low-temperature spray-drying process. The key to this process is that, after pasteurization, bovine colostrum can maximize the preservation of the activity of its bioactive components.
(1) Raw material formulation for bovine colostrum powder: 100 kg of defatted bovine colostrum, 10 kg of skimmed milk powder, 10 kg of sucrose, 0.075 mol/L of sodium citrate, and 0.10 mol/L of potassium phosphate (pH 6.5). The total dry matter content is 27%. Among the ingredients, sucrose, phosphates, and sodium citrate can all enhance the heat stability of active substances in bovine colostrum, while skimmed milk powder can serve as a carrier for bovine colostrum products.
(2) Bovine colostrum powder production process: Freezing preservation → Slow thawing at room temperature → Filtration → Clarification of milk → Skimming fat → Blending of raw materials → Heat sterilization → Spray drying → Packaging. In this process, the sterilization temperature is 63°C to 67°C for 35 minutes. During spray drying, the inlet air temperature is 140°C to 150°C, and the outlet air temperature is 60°C to 70°C. Following a second drying step in a fluidized bed, the final product—with a moisture content below 3% and excellent solubility—can be obtained.
(3) Composition of bovine colostrum powder: The bovine colostrum produced through the aforementioned ingredients and processes exhibits high protein activity, with lactoferrin content ranging from 46% to 52%, α-lactalbumin content ranging from 38% to 42%, and immunoglobulin content ranging from 4% to 7%.