How to Use a Centrifuge to Produce Edible Salt
Release time:
2012-07-19
Overview:
Salt production from brine mines primarily involves two major stages: brine extraction and salt production. Different mining types employ different brine-extraction methods. The methods for extracting natural brine include the bailer method, gas-lift method, oil-pump brine extraction, deep-well submersible brine pumps, and self-flowing brine extraction. In rock-salt-type mining areas, the most common extraction method is drilling and solution mining; some sites use the single-well convection method, while others adopt the dual-well hydraulic fracturing method.
1. Convection method
This method is one of the most widely adopted approaches for mining rock salt deposits both internationally and domestically today. It features a high degree of mechanization and relatively low costs. The method leverages the property of rock salt to dissolve in water. Specifically, a well is drilled down to the salt layer, and two concentric casing strings are installed. The outer casing string is cemented in place using oil-based cement to seal the well. Water is then injected into one of the casing strings, dissolving the salt layer, while brine is pumped up through the other casing string.
2. Fracturing method
This method involves drilling two wells on the ground, running casing pipes into them, and sealing the annular space between the casing and the wellbore. High-pressure water is then injected into one of the wells to create channels through the salt layer, dissolving it and producing a saturated brine solution. This brine is subsequently pumped out of the other well and delivered for production. Salt production takes place within the plant premises: the purified brine from the brine storage ponds is fed into tanks, where it is heated by steam, causing the water to continuously evaporate. After evaporation, the brine becomes a slurry consisting of half salt and half water. This slurry is then dehydrated using a centrifuge and further dried in a fluidized-bed dryer to yield the finished salt product. If the brine contains a high concentration of mirabilite, the mirabilite can be extracted either by freezing the mother liquor or by thermal methods. The Jiangxi Salt Mine has introduced the salt-mirabilite co-production process developed by Switzerland’s Sulzer company, which represents a leading and exemplary technology. If the brine contains a relatively high amount of gypsum, the gypsum is removed to ensure the quality of the salt product.