The Role of Centrifuges in the Development of the Aerospace Industry

Release time:

2012-07-16


Overview:

Centrifuges play a crucial role in the aerospace industry, especially for pilots and astronauts. During astronaut training, it’s essential to acclimate to the effects of hypergravity acceleration—and this hypergravity acceleration is precisely achieved through the use of centrifuges.

Centrifuges play a crucial role in the aerospace industry, especially for pilots and astronauts. During astronaut training, it’s essential to acclimatize to the effects of hypergravity acceleration—and this hypergravity acceleration is precisely achieved using centrifuges.
 
 
1. Overweight model
Gravity (g) is the attractive force between any two objects in the universe, and its magnitude can range from zero to infinity. For example, the gravitational acceleration on the Moon is 0.17 g, on Mars it’s 0.3 g, and on Earth it’s 1 g. Centrifuges can generate gravitational forces greater than 1 g. By using ultra-high-speed centrifuges, it’s possible to produce forces as high as 10³ to 10⁵ g. When a spacecraft enters Earth orbit at an altitude of 200 miles (321.8 kilometers), the gravitational force acting on it is equivalent to 95% of that on the Earth's surface. However, because the spacecraft’s centripetal acceleration counteracts Earth’s gravitational pull, objects aboard the spacecraft moving in orbit experience gravitational forces ranging from 10⁻² to 10⁻⁵ g. Throughout the entire process—from launch to flight and reentry—spacecraft undergo alternating periods of hypergravity, microgravity, and hypergravity again. To place a spacecraft into different orbits, multi-stage launch vehicles are typically used. Each stage of the launch vehicle produces a certain amount of acceleration, resulting in varying levels of hypergravity. Early rockets generated hypergravity levels of 7 to 8 g, while newer rockets produce less than 5 g. During the Space Shuttle’s launch, the peak hypergravity was kept around 3 g. During reentry, spacecraft also encounter hypergravity; early spacecraft had peak hypergravity exceeding 10 g, whereas newer spacecraft have reduced peak values to between 5 and 7 g. The Space Shuttle’s hypergravity during reentry was kept below 2 g.
 
Plants, animals, and humans living aboard spacecraft are likewise subjected to the effects of hypergravity and weightlessness during spaceflight. Organisms on Earth have evolved under 1g conditions and have developed tissue structures that are well-adapted to this gravitational environment. When plants and animals enter a different gravitational environment, they must re-adapt to the new conditions. The relationship between their response to gravity and the actual gravitational force may follow a linear or mathematical functional relationship. Tissue structures that have adapted to 1g will become dysregulated or degenerate in environments of hypergravity or microgravity as the organism attempts to adjust to the new gravitational conditions. Astronauts experiencing cardiovascular dysfunction, muscle atrophy, and osteoporosis during spaceflight provides a prime example of this phenomenon. Moreover, when organisms that have adapted to a new environment return to Earth’s 1g environment, they often exhibit maladaptive responses and require a period of readaptation. Thus, studying the effects of gravitational changes on living organisms—especially the effects of microgravity—is essential for the advancement of space exploration. At the same time, such research holds significant theoretical importance for our understanding of gravity’s role in the evolutionary processes of living organisms.
 
 
Research conducted under gravity levels exceeding 1 g is relatively straightforward and can be achieved on Earth by using various types of centrifuges. However, conducting long-term studies at gravity levels below 1 g on Earth is simply not feasible; the only viable option is to leave Earth and carry out such research in space laboratories or on celestial bodies with lower gravity than Earth—such as the Moon and Mars. Yet, performing multiple biological studies in space is impractical, primarily for the following reasons:

(1) Conducting biological research in space is extremely costly, and each mission involves numerous tasks, making it impossible to dedicate resources exclusively to biological and medical studies.
(2) In addition to the microgravity factor, other factors during spaceflight—including hypergravity, vibration, noise, radiation, the gas environment inside the cabin, and harmful substances—can all affect the objects being measured and influence the analysis of experimental results.
(3) Living organisms—especially humans—exhibit significant individual variation, so multiple repeated experiments are necessary to identify underlying patterns. At the same time, there are many research projects that need to be conducted. In space exploration, it is simply impossible to carry out such a large number of studies.
(4) Each study requires the participation of experts in this academic field and access to a variety of specialized scientific instruments—conditions that are not available in space. Therefore, it is essential to establish on the ground a model that simulates changes in gravity.

Ground-based simulation models of hypergravity and microgravity in the aerospace environment help achieve the following objectives:
(1) Understand which systems in living organisms are sensitive to gravity.
Determine their thresholds, the mechanisms for adapting to changes in gravity, their adaptive capacity, and the duration of adaptation.
(2) Predict how organisms that have already adapted to overweight and low gravity will readapt to a 1g environment.
(3) Propose preventive measures to mitigate potential issues that may arise when readapting to a 1g environment.

On Earth, centrifuges can be used to simulate hypergravity. The centripetal acceleration produced by the centrifuge generates a centrifugal force that acts parallel to the ground; this force and gravity together form two legs of a right triangle, with their resultant force being equivalent to the effective gravitational force experienced due to the centrifuge’s rotation. Thus, a centripetal acceleration of 1.5 g can produce a resultant force of 1.8 g, while a centripetal acceleration of 4 g can generate a resultant force of 4.1 g. A centrifuge consists of a power system, a central rotating shaft, and rigid rotating arms (Figure 1). The length of the centrifuge’s arms varies from 1 to 8 meters. The arm length is inversely related to the rotational speed: the longer the arm, the lower the required rotational speed; conversely, shorter arms allow for higher g-forces to be generated. However, in short-arm centrifuges, if the subject is tall, different parts of the body will experience varying levels of centrifugal force, complicating the effects on the subject. Therefore, short-arm centrifuges are typically used for small animals and plants. Depending on the experimental objectives, centrifuges of different sizes and configurations can be constructed. Some centrifuges allow the cabin position along the connecting arm to be adjusted, enabling the generation of different gravitational forces according to specific experimental requirements, whereas other centrifuges have cabins fixed permanently at the end of the mechanical arm, providing only a single, predetermined level of gravitational force.

The cabin of a centrifuge can generally rotate freely on its arm to keep the gravitational component aligned with the direction of Earth's gravity. Some centrifuges even allow their cabins themselves to change orientation, thereby accommodating special experimental requirements. At one research center of NASA, there is a set of centrifuges that includes a vestibular research-specific centrifuge (VRF—equipped with two 0.8-meter-long arms capable of rotating around three axes), a human centrifuge with 7.6-meter-long arms, and a rotating room with 8.125-meter-long arms. The VRF centrifuge is used to study the effects of various combined factors on small animals such as cats, monkeys, birds, and fish. Experiments on the VRF centrifuge can last from several hours to several days. Other animal centrifuges are primarily used to investigate the adaptive responses of rodents under hypergravity conditions and to provide hypergravity environments for certain space experiments.

The human centrifuge is primarily used to study the physiological responses and perceptual changes in humans under conditions of hypergravity during the return phase of spaceflight and after prolonged bed rest. It can also be employed for selecting and training astronauts in their ability to withstand hypergravity. Typically, experiments conducted on the human centrifuge do not exceed one hour in duration. The ability of a test subject to withstand hypergravity is inversely proportional to its own mass. Plants, insects, and rodents can endure gravitational forces far greater than humans. For example, small, young plants can easily survive for up to 10 minutes under accelerations of 30–40 g without experiencing any noticeable structural changes; even accelerations as high as several hundred grams fail to cause significant damage to plant structures. In contrast, mice can only tolerate 15 g of gravity for 10 minutes; if the gravitational force reaches 20 g, they will all die. Humans, on the other hand, can withstand head-to-pelvis orientation forces of only about 4–5 g for roughly 10 seconds.
 
2. Acceleration Physiology Laboratory
 
Founded in 1988, it is part of the “Project 211,” the “Project 2110,” and the “Triple Construction” initiative. Since its establishment, it has undertaken numerous research projects funded by the National Natural Science Foundation, the National 863-2 Program, and the Military Medical and Health Fund. It also provides teaching and internship opportunities at three levels—undergraduate students majoring in Air Force Clinical Medicine (in the course “Aerospace Biodynamics”), as well as master’s and doctoral students in Aerospace Medicine—at our university. To date, it has trained numerous doctoral and master’s graduates.
 
The laboratory is equipped with several distinctive large-scale devices, including an animal centrifuge, a dual-power human short-arm centrifuge, a multi-functional rotating bed, a three-dimensional roller system, an anti-gravity exercise trainer, and an artificial-powered lower-body negative-pressure training chamber. It also features specialized equipment such as lower-body negative-pressure pants and a self-powered lower-body negative-pressure training device. The laboratory is outfitted with a fully computerized, multifunctional physiological recorder, as well as advanced monitoring equipment for electrocardiography, blood pressure, and blood oxygen saturation, along with devices for monitoring cerebral blood flow and cardiac function. These tools enable non-invasive beat-by-beat monitoring of blood pressure, cardiac function, and heart rate; Doppler monitoring of cerebral blood flow; remote telemetry of basic physiological signals; and analysis of heart rate variability.

This room has seven major functions:
① Vestibular function training;
② Assessment of standing endurance function;
③ Simulation and evaluation of the push-pull effect;
④ Evaluation of ground-based pre-adaptation for aerospace fluid shifts;
⑤ Anti-G strain simulation training;
⑥ Anti-gravity physiological training;
⑦ Artificial gravity physiological training.

The laboratory as a whole has reached a domestically leading level.
 
My primary research focus is on the physiology of acceleration. In the field of aerospace medicine, I have conducted research on the physiology of hypergravity, with a particular emphasis on the mechanisms underlying loss of consciousness induced by high G-forces and their monitoring, as well as studies on protective measures for high-G exposure among high-performance fighter pilots.
① A rat model for rapidly inducing G-LOC via lower-body negative pressure has been established, providing a valuable animal model for in-depth research into the mechanisms underlying G-LOC. For the first time, we propose using the cessation of blood flow in the common carotid artery as a monitoring indicator for the onset of loss of consciousness in animals.
② Systematically revealed the nature, temporal course, and recovery of changes in learning and memory functions and cortical neuronal morphology in rats following high-G exposure.
③ A multiple-mechanism hypothesis has been proposed to explain high-G-induced brain injury and learning-memory impairment: Specifically, cerebral ischemia caused by high-G exposure is the primary factor underlying both brain injury and learning-memory deficits. The biochemical and molecular biological mechanisms involved include reduced cerebral energy metabolism, disruption of cerebral ion homeostasis, increased permeability of the blood-brain barrier, upregulation of brain nitric oxide synthase and c-fos expression, and the protective effects of HSP70. Significant fluctuations in intracranial pressure and increased stress are also important factors contributing to high-G-induced brain injury. Moreover, alterations in hemorheological properties play a certain role in high-G-induced brain injury.
④ It is proposed that low-G preconditioning exerts a protective effect against brain injury and learning-memory impairment induced by high G.
⑤ A training protocol for lower-body negative-pressure anti-G maneuvers for high-performance fighter pilots has been proposed.
⑥ A mathematical model was developed to simulate the cardiovascular system’s response under orthostatic stress, providing guidance for pilot training. In the field of aerospace medicine research, the primary focus has been on physiological studies of weightlessness, with particular emphasis on the physiological effects of medium- and long-term weightlessness and associated protective measures. The study elucidated that the mechanism underlying impaired orthostatic tolerance induced by simulated weightlessness involves alterations in cardiovascular function, reduced cerebral blood flow, and endocrine changes. For the first time, a lower-body negative-pressure countermeasures protocol was proposed for Chinese astronauts during manned spaceflights. Using the established model, simulation studies were conducted to explore the mechanisms underlying post-spaceflight cardiovascular dysfunction, thereby providing experimental evidence to support medical safeguards for Chinese astronauts during manned space missions.
The above-mentioned research findings have reached domestically leading and internationally advanced levels.
 
To counteract the effects of prolonged weightlessness on the human body, the most effective approach is to create artificial gravity aboard manned spacecraft. Results from studies conducted by the former Soviet Union on the "Cosmos" series of biological satellites indicate that artificial gravity can effectively prevent some of the physiological impacts of weightlessness on the human body. However, these studies also revealed certain adverse side effects in mice living in spacecraft centrifuges—for example, a decline in the functional capacity of the cerebral cortex, suppression of protein metabolism in brain regions associated with motor control (particularly the motor cortex), and a reduction in the sensitivity and responsiveness of the animals' semicircular canals. These effects may have been caused by the centrifuge's arm being too short and its rotation speed being too high.
 
Even in a high-speed centrifuge, the vestibular system can elicit certain responses and hallucinations. Therefore, when designing artificial gravity environments, it is essential to take into account the effects of centrifuge rotational speed and radius on the human body. The rotational radius and speed must be carefully matched, and relevant personnel should undergo adaptive training to reduce side effects to an acceptable level. In addition to conducting human trials, the design and validation of artificial gravity protection measures also require animal experiments in space missions.