Motor Selection Options for Low-Temperature Centrifuges

Release time:

2016-02-24


Overview:

Motor Selection Options for Low-Temperature Centrifuges
   Low-temperature centrifuge As a widely used piece of equipment in the modern centrifuge industry, this type of device has seen increasingly smooth development over the past few years, attracting growing attention from more and more people. Next, the editor will briefly introduce two motor options for low-temperature centrifuges. Currently, there are mainly two types of motors available on the market for centrifuge equipment: brushed motors and brushless motors. Each of these motor types has its own set of advantages and disadvantages, among which:
  1. Introduction to the advantages and disadvantages of brushed motors
  Advantages: The low-temperature centrifuge employs a brushed motor as its drive system. Specifically, carbon brushes are used at the electrode contacts within the motor’s internal structure. The two brushes (either copper or carbon brushes) inside the motor are fixed to the rear cover via insulating holders, directly connecting the positive and negative terminals of the power supply to the commutator on the rotor. The commutator, in turn, connects to the coils on the rotor. As the polarities of these three coils continuously alternate, they interact with the two permanent magnets fixed to the outer casing, causing the rotor to spin. This type of centrifuge boasts advantages such as simple manufacturing and low production costs.
  Disadvantages: Low-temperature centrifuge During operation, the rotational speed remains constant, making it difficult for users to adjust the speed. Moreover, since the commutator is fixed to the rotor inside the motor, while the brushes are fixed to the housing (stator), as the motor rotates, the brushes continuously rub against the commutator, generating significant friction and heat. As a result, brushed motors have low efficiency and suffer from substantial energy losses.
  2. Introduction to the advantages and disadvantages of brushless motors
  Advantages: The advantage of brushless motor centrifuges lies in the fact that the no-load resistance of the centrifuge primarily stems from the rotational contact points between the rotor and stator. Therefore, the equipment uses ball bearings at both ends of the rotor to reduce friction, thereby minimizing heat generation. This results in higher efficiency and faster rotation speeds, and users can independently control the exact speed, offering strong controllability.
  Disadvantages: The cost of the speed control system for brushless motor centrifuges is higher than that for brushed high-speed motor speed control systems, and the centrifuge’s controller is prone to failures during use.
  More about Low-temperature centrifuge For more information, please call the official website of Shanghai Luxiangyi Centrifuge Instrument Co., Ltd.