The Gerber method for fat determination in milk is inseparable from a centrifuge.

Release time:

2021-01-22


Overview:

A milk fat centrifuge is used in the dairy industry primarily for detecting fat content in dairy products via centrifugal separation. Although fat is essential for human growth and development, everything in excess can be harmful—long-term consumption of high-fat foods carries the risk of obesity.

   Milk fat centrifuge For the dairy industry, this is primarily used for fat detection in dairy products via centrifugal separation.

  Although fat is essential for human growth and development, everything in excess is harmful. Long-term consumption of high-fat foods can increase the risk of obesity.

  Especially for human infants, the first three years—more or less—require milk and dairy products to obtain the fats they need. However, if these dairy products are not subjected to rigorous separation testing and there’s no unified standard in place, the consequences could be dire. Many children might end up absorbing excessive amounts of fat, leading to obesity, impairing calcium absorption during critical growth periods, causing cardiovascular damage, and even resulting in abnormal development.

  So next, let’s focus on how the cream separator is applied in cream-fat detection for dairy products.

TD5M.jpg

  Actually, this testing method has its own name: the Gerber method—the Gerber fat meter directly measures milk fat by direct reading.

  In addition to the cream separator, a Gerber fat meter is also required to rapidly determine the fat content. The principle behind this method is as follows: Sulfuric acid is added to the milk to disrupt the colloidal structure of the milk and remove the protein coat surrounding the fat globules. After centrifuging to separate the fat, the volume of the fat layer is measured directly, which corresponds to the fat content. The testing procedure is as follows: First, add 10 mL of sulfuric acid into the Gerber fat meter; then, slowly add 10.75 mL of the sample followed by 1 mL of isoamyl alcohol. Secure the bottle with a rubber stopper, place it mouth-down, and wrap it in a cloth to prevent it from being ejected during shaking. Shake vigorously until the mixture is thoroughly homogenized, then let it stand for several minutes (mouth-down). Next, immerse the bottle in a water bath at 65–70°C for 5 minutes. After removing it from the water bath, place it in a cream separator and centrifuge at 1100 rpm for 5 minutes. Finally, re-immerse the bottle in the 65–70°C water bath for another 5 minutes, then remove it immediately and take the reading right away to obtain the percentage of fat content.

  It is worth noting that the pipette volume used in the Gerber method is 10.75 mL. This is because, when the fat content of dairy products ranges from 2.64% to 4.88%, the Gerber method yields the smallest deviation—only ±0.02%—when 10.75 mL of dairy product is measured. Given that the fat content of natural dairy products generally falls within the 2.64%–4.88% range, this makes the Gerber method highly practical and applicable.

  The above is a brief introduction to the application of cream separators in the dairy industry. If you’d like to learn more about the technical details of centrifuges, please stay tuned for updates from Shanghai Luxiangyi Centrifuge Instrument Co., Ltd.