Choosing the right medical centrifuge can bring users more benefits.

Release time:

2019-10-29


Overview:

Medical centrifuges are commonly used in hospital clinical laboratories and testing rooms to centrifuge blood. After centrifugation, the blood separates into layers: the serum at the top and the blood cells at the bottom. The serum above is then used for various biochemical tests. Almost all blood tests require the use of a centrifuge. Therefore, medical centrifuges are essential equipment in hospital clinical laboratories. They are also widely used in blood collection and sample preparation in clinical laboratories. Currently, domestically produced low-speed centrifuges can fully meet the needs of hospital clinical laboratories.

   Medical centrifuge Primarily used in the medical industry, its technology is becoming increasingly sophisticated, making it highly favored by more and more users. The medical centrifuge is driven by a high-power AC variable-frequency motor and equipped with a high-precision speed-measuring system. It features a microcontroller-based control circuit, a high-brightness LED display, electric lock/unlock functionality, automatic shutdown protection upon opening the lid, and a soft-braking mechanism to prevent back-rotation upon shutdown.
  Medical centrifuges are commonly used in hospital clinical laboratories and testing departments to centrifuge blood. After centrifugation, the blood separates into layers: the serum at the top and the blood cells at the bottom. The serum above is then used for various biochemical tests. Centrifuges are essential for all kinds of blood tests and related procedures. Therefore, medical centrifuges are indispensable equipment in hospital clinical laboratories, particularly for blood collection and sample preparation. Currently, domestically produced low-speed centrifuges can adequately meet the needs of hospital clinical laboratories.
  The process of using medical centrifuges in the hospital’s laboratory:
  1. After the doctor receives the blood collection tubes containing blood, they will place them on a rack for vacuum blood collection tubes. Once a sufficient number of tubes have been collected, they will be transferred into a medical centrifuge for centrifugation. The number of centrifuge tubes must be even. The doctor will pair the tubes and place them symmetrically inside the rotor of the laboratory centrifuge. During the centrifugation process, the medical centrifuge requires balance.
  2. The typical setting time is 5 minutes, with the rotation speed around 5,000 revolutions per second, unless otherwise specified for special tests. After starting the medical centrifuge, the rotational speed gradually increases until it reaches the set speed. Once the preset time has elapsed, the medical centrifuge will automatically stop. Due to inertia, the centrifuge’s speed will slowly decrease from the set speed. Therefore, when the speed drops to zero and the centrifuge comes to a complete stop, the door lid will automatically open. At this point, the physician can remove the centrifuged blood collection tubes, place them onto a tube rack, and then send them for testing.
  3. Temperature-controlled centrifugation: Heat generated during centrifugation can compromise the stability of analytes. Therefore, when performing clinical chemistry analyses on blood samples, it is essential to use a temperature-controlled centrifuge (also known as a refrigerated centrifuge). Some temperature-sensitive analytes—such as adrenocorticotropic hormone, cyclic adenosine monophosphate, and catecholamines—should be separated at 4°C. Samples transported under refrigeration must also be centrifuged at the required temperature and thus necessitate the use of a refrigerated centrifuge. For analytes with no specific temperature requirements, a standard ambient-temperature centrifuge may be used; the centrifugation temperature should be set between 20°C and 22°C.
  Choosing the right medical centrifuge not only helps solve production problems and improve work efficiency, but also saves production costs and reduces operational risks. The main factors influencing the selection process are as follows:
  1. Rotational speed of medical centrifuges: Generally, medical centrifuges should operate at speeds above 3,000 rpm. The higher the rotational speed, the greater the separation factor of the medical centrifuge, and the better the separation performance.
  2. Material of medical centrifuges: Different materials exhibit varying physicochemical properties, such as wear resistance and corrosion resistance. In foreign medical centrifuges, the lower-grade material is typically 316L or duplex stainless steel, while the abrasive components must be made from ceramic composite materials.
  3. Differential-speed control in medical centrifuges: Different differential-speed controllers vary significantly in their control accuracy, as well as in terms of service life and maintenance costs. The higher the differential-speed accuracy, the better the equipment's adaptability to various materials; therefore, it is advisable to choose equipment with high differential-speed accuracy.
  4. Aspect Ratio: The larger the aspect ratio of a medical centrifuge, the greater its processing capacity and the lower its moisture content.
  5. Control System: Is it equipped with automated programming control? Currently, both domestic and international equipment manufacturers have largely achieved fully automated control for this equipment.
  6. Installation power: This affects energy consumption control; generally, domestic equipment has a higher energy consumption ratio, while foreign equipment has a lower one.
  7. Manufacturing Process: Medical centrifuges are separation devices with high-precision manufacturing requirements. Products manufactured by companies lacking advanced machining capabilities tend to have high failure rates and limited processing capacities.
  An important indicator for measuring the separation performance of medical centrifuges is the separation factor. It represents the ratio of the centrifugal force experienced by the material being separated to its gravitational force within the rotor. The higher the separation factor, the faster and more effective the separation typically is. Industrial medical centrifuges generally have separation factors ranging from 100 to 20,000; ultra-high-speed tubular separators can achieve separation factors as high as 62,000, while analytical ultracentrifuges can attain separation factors as high as 610,000. Another factor determining the processing capacity of medical centrifuges is the working area of the rotor—larger working areas correspond to greater processing capacities.