The entire centrifuge system is ingeniously designed to achieve high efficiency.

Release time:

2015-08-31


Overview:

Centrifuge
   Centrifuge The entire system ingeniously leverages the combined effects of centrifugal force and gravity to achieve continuous operation, attaining remarkably high operational efficiency. The objects to be centrifuged enter the centrifuge through the inlet and are subjected to centrifugal force within the separation system. The liquid passes through a screen into the filtration chamber and is discharged via the mother liquor outlet. During the separation process, the residence time within the separation system can be precisely controlled by adjusting the feed rate and the relative positions of various components in the separation system, thereby meeting the specified requirements for solid moisture content. What sets this apart from other systems is that, in conventional centrifuges, the slurry volume remains fixed—no matter how much slurry is loaded into the test tube, the amount remains constant after centrifugation. In contrast, here the slurry volume is not fixed; as centrifugation proceeds, the material is continuously discharged, thus achieving high efficiency.
  Centrifuges are high-tech products that integrate multiple disciplines and advanced technologies. Given the wide variety of manufacturers and models available, it’s crucial to conduct thorough research when selecting a centrifuge. First, you should determine the model based on your specific application requirements, such as rotor type, rotation speed, capacity, and temperature control. Generally speaking, high-speed centrifuges are not suitable for low-speed applications, and specialized centrifuges are not ideal for general-purpose use. General-purpose centrifuges, on the other hand, can handle both high- and low-speed operations and accommodate a variety of rotor types, making them highly popular in scientific research laboratories. However, they tend to be more expensive. Once the model is selected, you should further evaluate the product’s technical specifications, performance characteristics, maintainability, safety features, stability, reliability, compliance with safety standards, price, design, and appearance. Compared to resistance-based energy-consuming braking systems, regenerative braking units themselves represent an energy-saving solution. Yet, every variable-frequency drive (VFD) typically requires a dedicated braking unit whenever braking is needed. Consequently, the number of braking units required must match the number of VFDs used. While the cost of a braking unit is roughly comparable to that of a VFD, its duty cycle is relatively low. The widespread adoption of common DC bus VFD drives in centrifuges has effectively addressed the issue of “one unit underfed while another overfed” that arises when one VFD accelerates and another decelerates simultaneously. This approach eliminates the need for redundant braking units, reduces the frequency of braking operations, minimizes interference with the power grid, and significantly improves power quality. It plays a particularly important role in reducing equipment investment, increasing equipment utilization rates, and achieving substantial savings in both equipment costs and energy consumption.
  The failures of centrifuges mainly center on two aspects: vibration and mechanical seal leakage. Regarding vibration, domestically produced machines face more pronounced issues, primarily due to insufficient machining accuracy. As for mechanical seal leakage, there isn't much difference between domestic and imported products—the sealing performance of both domestic and imported seals is essentially comparable. However, both types still exhibit some degree of leakage. Nevertheless, domestic products have a significant price advantage, and most... Centrifuge During operation, no effective monitoring and fault-diagnosis system has been implemented; the overload protection device fails to perform its intended function; and the automatic control system is insufficiently sophisticated, with a widespread lack of differential-speed regulation devices. The enclosed explosion-proof centrifuge is a key piece of equipment in PTA production. Since the separation process involves solid-liquid separation under a pressure of 0.45 MPa and at a high temperature of 148°C, and given that the material fed into the centrifuge consists of crystalline particles of crude terephthalic acid (CTA) containing 35% to 37%, along with water (H₂O) and acetic acid—materials that are highly corrosive—it is essential for the centrifuge to possess sealed, explosion-proof, and corrosion-resistant capabilities under specific pressure and high-temperature conditions. To achieve domestic production of enclosed explosion-proof centrifuges, the following key tasks need to be addressed:
  Since PTA centrifuges have large processing capacities and screw conveyors feature high sludge-handling power, the torque requirements for the differential gear used in horizontal screw centrifuges can reach as high as over 100,000 N·m. At the same time, the key factors for domesticating the differential gear include improving the machining accuracy of internal gears, enhancing the indexing accuracy of the planetary carrier, and optimizing the lubrication and cooling design of the central bearings within the gearbox. Abroad, differential gears—as components of screw centrifuges—are typically manufactured by specialized production plants, and centrifuge manufacturers directly purchase them for integration and assembly. Therefore, you can either find domestic gear manufacturers specializing in gear production to handle the fabrication, or directly contact overseas specialist manufacturers to procure the necessary components. Once the model is finalized, it’s advisable not to stock too many rotors, as their service life is limited by the number of centrifugation cycles and the duration of operation. Moreover, rotors are quite expensive; thus, it’s best to focus on selecting rotors that will be commonly used over the next three to five years. The manufacturer’s after-sales service is also a crucial factor to consider. Centrifuge maintenance requires highly specialized technical expertise—not only addressing mechanical issues but also involving quality and safety considerations. According to regulations, after major overhauls or repairs involving safety-critical components, timely metrological verification is essential. This includes checking the accuracy of imbalance sensors, rotational speed, temperature readings, electrical safety, and electromagnetic compatibility. Users should pay particular attention to this point.
  In electrical drives for chemical enterprises, the application of variable-frequency drives (VFDs) in centrifuges is extremely common. Due to various factors related to both the process and the drive equipment, regenerative energy frequently occurs. In general-purpose VFDs, there are two commonly used methods for handling regenerative energy: (1) dissipating it into a “braking resistor” artificially connected in parallel with the capacitor in the DC link—this mode is referred to as dynamic braking; (2) feeding it back into the power grid—this mode is called regenerative braking (also known as feedback braking). Centrifuge The principle of a common DC bus is based on the fact that most general-purpose variable-frequency drives adopt a AC-DC-AC conversion topology. When the motor is in braking mode, the braking energy is fed back to the DC side. To better handle this regenerated braking energy, a common DC bus is used.