On-site Pre-treatment of Total Phosphorus in Surface Water: An Analysis of the Importance of Water Treatment Centrifuges Across Various Industries
Release time:
2022-07-12
Overview:
Understand Water treatment centrifuge You must first understand water!
Yes, don’t be surprised—water is actually quite complex, take turbidity, for example.
Take surface water as an example—it comes in various forms and has a complex composition.
Conceptually speaking, surface water refers to the water found on Earth’s land surface—this can include lakes, glaciers, streams, freshwater wetlands, and more. It is one of the primary sources of water for human life.
Therefore, once water is connected to our daily lives, we must be extremely meticulous—analyzing its chemical composition and assessing its turbidity. Only water that meets the standards can be safely used by people.
Therefore, Shanghai Luxiangyi Centrifuge Instrument Co., Ltd. has designed and manufactured the TD-SZ water quality centrifuge—specifically tailored for total phosphorus monitoring in surface water—in accordance with the clear specifications for surface water total phosphorus monitoring technology outlined in the documents issued by the China National Environmental Monitoring Center. Moreover, this centrifuge features a compact design and comes packaged in a box, making it convenient to carry.

Next, let’s talk about the turbidity of water quality.
Conceptually, this refers to the light transmittance of water, which can be categorized numerically into three levels: <200, 200–500, >500.
So when do you need a centrifuge? The answer is: when the value exceeds 500.
Let’s delve deeper into this by conducting an experiment using a water-quality centrifuge to treat mycelial wastewater.
The principle behind centrifugal sedimentation separation lies in the fact that suspended liquids or solid particles settle at different rates in a liquid. Under the action of a centrifugal force field, these particles efficiently settle and stratify, thereby achieving the separation of liquid and solid phases. An important characteristic of a centrifuge's separation capability is the separation factor, which represents the ratio of the centrifugal force experienced by the material being separated to its gravitational force within the rotating drum. The higher the separation factor, the more efficient and effective the separation typically is.
In the laboratory, we selected a centrifuge with a rotational speed of 4,000 r/min and a required centrifugal force exceeding 2,000 to separate the mycelial wastewater. We placed the mycelial wastewater (with an SS value of 20,000 mg/L) into centrifuge tubes, loaded them into the centrifuge, turned on the power, ran the centrifuge for 40 seconds, then switched it off. We then measured the SS concentration in the supernatant liquid obtained after centrifugation. Additionally, we prepared another sample of mycelial wastewater at the same initial SS concentration and added the selected flocculant to it, adjusting its concentration in water until the flocculation effect was achieved. After stirring, we performed the experiment using the same procedure and again measured the SS concentration in the supernatant liquid obtained after centrifugation.
In this experiment, a centrifuge with a separation centrifugal force of 2,000 or higher was used. The experimental results demonstrate that it is feasible to treat mycelial wastewater using a centrifuge—as long as the centrifugal force meets the required level and a suitable flocculant is added—mycelial wastewater can be effectively treated directly by centrifugation, ensuring that the effluent meets discharge standards. During the experiment, the addition of a flocculant played multiple roles. This is because the wastewater contains fine mycelial particles and other impurities that, due to like charges repelling each other, do not easily aggregate into larger particles and are extremely difficult to settle solely by their own weight, thus forming a relatively stable suspension. If a chemical agent with an opposite charge to that carried by the suspended particles can be employed to adsorb and neutralize the surface charges on these particles, thereby reducing their surface potential, the stability of the colloidal particles will be disrupted, leading to aggregation and accelerated settling. Therefore, we selected a specific type of polyacrylamide that can function effectively under alkaline conditions as the flocculant.
Through experimentation, we can see that water clarifiers can reduce water turbidity. In various sectors of life, there are high requirements for water quality—not just in food and beverage production, but also in other industries. For example, in the textile industry, where water turbidity should be less than 5; and in the paper-making industry, where water turbidity should not exceed 2 to 5 degrees.
So, through today’s article, you’ve probably gained a better understanding of the importance of centrifuges in water treatment, haven’t you!