This is precisely why domestically produced desktop high-speed centrifuges are becoming increasingly popular.

Release time:

2019-09-30


Overview:

Desktop high-speed centrifuges, thanks to their technological and physical advantages, are widely used in various manufacturing industries and have also become commonplace in major laboratories and research institutions.

   Desktop high-speed centrifuge Thanks to its technological and physical advantages, it is widely used in various manufacturing industries and has also become commonplace in major laboratories and research institutions.

  Of course, desktop high-speed centrifuges are also highly favored in fields such as clinical medicine, biochemistry, genetic engineering, and immunology, and are commonly used equipment for centrifugal separation in hospitals at all levels, research institutions, and higher education institutions.

  According to incomplete statistics, compared with similar foreign models, domestically produced desktop high-speed centrifuges are becoming increasingly popular in the industry thanks to their advantages such as lower prices and more reliable maintenance. Of course, another key reason is their ease of installation: after purchasing a domestically produced desktop high-speed centrifuge, installation personnel typically come on-site to assist with the installation and provide training to the operators, enabling them to start working right away. By contrast, imported centrifuges rarely offer this level of support. Below, we’ll briefly compare the installation requirements for domestically produced versus imported desktop high-speed centrifuges.

  When the imported desktop high-speed centrifuge is operating, the unit has relatively strict requirements for airflow direction; otherwise, it will be difficult to bring the equipment to its ideal operating condition.

  (1) The side connection for the discharge outlet of the mother liquor is equipped with a vent pipe, which serves as a natural vent.

  (2) As a forced air intake system, this benchtop high-speed centrifuge is equipped with an intermediate chamber. The airflow from the intake serves to seal off the gas flow generated by the discharge of solid and liquid phases, thereby achieving a sealing effect. During operation of the centrifuge, the centrifugal force creates a negative pressure within the chamber, ensuring that the amount of air drawn in equals the amount expelled. Consequently, both the solid and liquid phases of the centrifuge experience an outflow of gas.

  (3) As a forced exhaust vent, if this airflow is not properly discharged, it can cause air blockage in the feed hopper of the benchtop high-speed centrifuge, increasing the operating current and vibration. In severe cases, this can easily lead to bridging, resulting in accidents (the dewatered filter cake has a certain moisture content and exhibits very poor flowability). When designing for forced exhaust ventilation, it’s essential to allow sufficient margin in the calculated exhaust volume, since imported centrifuges have external gases entering the intermediate chamber. Domestic centrifuges, on the other hand, do not have an intermediate chamber; instead, they rely on labyrinth seals and soft seals to achieve solid-liquid phase sealing during operation.

  (1) For natural exhaust vents, the equipment manufacturer provides a built-in steam-water separator tank. Simply connect piping to the flange at the top of the separator tank to meet the exhaust requirements.

  (2) As a forced exhaust port, although domestically produced centrifuges do not involve the introduction of external gases, to ensure they can achieve optimal operating conditions, forced ventilation should be considered.

  Chinese centrifuge manufacturers place great emphasis on quality development, and as a result, they invest heavily in centrifuge production technology. Consequently, domestically produced desktop high-speed centrifuges are continuously improving. Today, the market offers a variety of mid- to high-end centrifuge models that boast advantages such as smooth operation, compact size, elegant design, low temperature rise, high operational efficiency, and broad applicability.