In addition to knowing the correct operating procedures, the centrifuge rotor should be used during the use of the centrifuge.
Why do you know that the correct centrifuge operation process, but also the main centrifuge rotor, in fact, the main reason is that the centrifugal force of the centrifuge is large and small, the rotor material is also diverse, but the rotor material installed on a centrifuge is Fixed, it is impossible to replace the rotor because of the centrifugal force required by the material to be separated by the centrifuge. Therefore, the rotor of the centrifuge may be damaged. This damage is accumulated over time, not at all, so every time When using a centrifuge, be sure to observe the centrifuge rotor primarily.
Next, Xiaobian will tell you from which aspects to pay attention to the centrifuge rotor:
If the rotor and gasket show signs of corrosion or other defects, do not use a centrifuge.
Use only centrifuges equipped with rotors and fittings approved by the manufacturer. Inferior equipment is strictly prohibited. Glass breakage or ware explosions are out of balance at high speeds and can be dangerous.
Do not open the cover while the rotor is moving.
Do not use any material that can damage the centrifuge rotor. For example, highly corrosive materials can damage the material of the rotor and its liner and affect their mechanical strength.
It is forbidden to extend your hand into the rotor cavity while the rotor is moving.
Infectious substances, toxic substances, pathogenic substances, and radioactive substances must be used in specific rotors and containers. If there is a risk of contamination by toxic, radioactive or pathogenic substances, appropriate measures should be taken to ensure their own personal safety.
Do not use a centrifuge if the rotor is overloaded.
If the rotor is loaded asymmetrically, do not use a centrifuge.
The above is the use of the centrifuge, focusing on the operation of the centrifuge rotor, are simple to explain the analysis, if you want to know more about the centrifuge rotor information, please pay more attention to Shanghai Lu Xiangyi Centrifuge Instrument Co., Ltd.
