Although the centrifuge is a high-tech device, there are some common faults. The vacuum is the most common fault. For high-speed, ultra-speed centrifuges, most of them do not have vacuum equipment. The vacuum device is to let the centrifugal chamber operate in a medium or high vacuum state, reducing the friction on the rotor.
However, if the centrifuge does not work, for high-speed, ultra-speed centrifuges, see if the centrifugal conditions are still suitable for selection, check the sensing part, control system and display unit, etc., as long as the step by step inspection will Find out the reason.
Therefore, when the centrifuge declines, the vacuum system must be checked first, that is, the oil is replaced, so that the vacuum will slowly return to the original. There are also some small desktop centrifuges. People often drop the rotor in the centrifugal chamber. After a long time, it will be stuck on the shaft. At this time, do not hit hard, otherwise it may damage the centrifuge. The shaft, which in turn damages the centrifuge, can also cause unexpected accidents. If the above situation occurs, don't panic first, and you have to wait for the professional engineer to help you out.
