Choose the centrifuge rotor by finding answers to these three questions.
Release time:
2020-06-30
Overview:
Why is it on the market now? Centrifuge Has the rotor gradually transitioned from a metal rotor to a carbon fiber composite material?
Today, advances in centrifuge rotor material technology have led to the introduction of carbon-fiber composites. Carbon-fiber rotors are up to 60% lighter than their equivalent metal counterparts. These lightweight carbon-fiber rotors offer improved ergonomics, providing a safer working environment and significantly reducing the risk of damage to the centrifuge. Many high-capacity carbon-fiber rotors even feature integrated lifting handles, enabling users to load and unload the rotor into and out of the centrifuge with less effort and strain, thereby lowering the risk of lower-back injuries. These lightweight characteristics also result in faster acceleration and deceleration rates, shortening run times and reducing wear on the centrifuge’s drive components.
Previously, centrifuge rotors were typically made from “lightweight” aluminum and titanium metals; however, in laboratory settings, these materials often pose unique lifting hazards. Conventional floor-standing centrifuge rotors can weigh up to 70 pounds (?30 kilograms) when fully loaded and have bulky, unwieldy shapes. To mitigate ergonomic risks associated with lifting centrifuge rotors, it is recommended that a second person always assist in removing the rotor from the centrifuge and that a cart be used for transportation. However, this approach is not always feasible.
Moreover, metal rotors in laboratories are prone to corrosion and degradation when exposed to moisture, chemicals, and alkaline solutions (such as sodium hydroxide or other salts), which can compromise the structural integrity of the rotor. Additionally, the substantial loads and stresses generated by high rotational speeds and repeated cycling can cause the metal rotor’s structure to stretch and change dimensions, thereby shortening the rotor’s service life and even leading to rotor failure—posing a serious threat to the rotor’s structural integrity. Metal rotor failures caused by stress corrosion can result in catastrophic damage to the centrifuge, incurring costly repair expenses for the laboratory. More importantly, such failures put laboratory personnel at risk.
As a result, carbon-fiber composite rotors are also corrosion-resistant, eliminating the ongoing hazards posed by exposure to moisture, chemicals, or alkaline solutions. These rotors can be safely used with most laboratory detergents and solutions, ensuring easy maintenance and care. Moreover, they can be sterilized at high temperatures and pressures. In addition, carbon fiber exhibits exceptional fatigue resistance, effectively mitigating the risks of elongation and performance degradation during extended operating cycles.
So, how do we choose a centrifuge rotor? We can find the answer by considering these three questions:
1. What are the advantages of using a fixed-angle rotor?
Fixed-geometry rotors have aerodynamic characteristics and low drag. This means they can increase speed while generating less noise and heat. Due to the higher speeds, centrifugation time can also be reduced.
2. What are the advantages of using a rotary rotor?
The rotor used in the setup typically has a large capacity (in terms of the number of tubes or volume). Thanks to the swinging motion, the pills are evenly distributed at the center of the bottom of the tube—ideally in 15/50 ml conical flasks. The large capacity allows for exceptional flexibility, accommodating a wide variety of tubes or microplates.
Attention: Each position on the rotating rotor is equipped with a bucket!
3. How long can the centrifugal rotor be used safely?
Operating centrifuge rotors and buckets subjects them to enormous stress loads. Over time, this can lead to material fatigue. Therefore, each rotor will be provided with recommended maximum numbers of rotations and/or maximum service life—whichever comes first. For more detailed information, please refer to the documentation included with the centrifuge and rotor. These values must not be exceeded, as operating a rotor or bucket that has reached its fatigue limit could result in an accident.
After reading the information above, do you now have a new understanding of centrifuge rotors?