High-capacity centrifuges are the "hot commodity" in the centrifuge market.
Release time:
2016-10-09
Overview:
High-capacity centrifuge It’s a hot commodity in the centrifuge market—why is that? First, let’s look at the variety of products available. After all, only highly popular products are continuously developed into new variants. Take, for example, the high-capacity centrifuge: it can be further categorized into laboratory high-capacity centrifuges, clinical lab high-capacity centrifuges, low- (or high-) speed high-capacity centrifuges, refrigerated high-capacity centrifuges, and many more—there are simply too many types to list them all!
Shanghai Luxiangyi Centrifuge Instrument Co., Ltd., leveraging its industry strengths, has accumulated extensive experience in the centrifuge field and gained deep insights into high-capacity centrifuges. By drawing on both domestic and international popular centrifuge models, the company focuses on introducing the key technologies and recent advancements in centrifuge design from a functional and structural perspective. Through summarizing and comparing the technical features of widely used domestic and foreign models, the company aims to provide valuable guidance for equipment selection. Among centrifuge technologies, AC variable-frequency speed control is gradually replacing DC speed-control systems, which remain the core component of centrifuges. The AC variable-frequency system comprises three major elements: control, power drive, and motor—primarily responsible for regulating the motor’s rotational speed. In the development of high-capacity centrifuges, DC speed control has played an indispensable role. Its main advantages include excellent starting and braking performance, a wide speed-regulation range, simple structure, low cost, and well-established theoretical and practical foundations. Consequently, before the 1980s, DC speed control was widely adopted in centrifuges and continues to be used today, undergoing ongoing improvements. For instance, the wear resistance of DC motor commutators and carbon brushes has been enhanced to extend the service life of high-capacity centrifuge motors and increase the replacement cycle of carbon brushes. Thyristor-phase-controlled DC speed control represents a classic DC speed-control solution. With its simple structure and mature technology, it essentially meets the speed-control requirements of centrifuges and thus enjoys widespread application both domestically and internationally. However, its main drawbacks include poor rectification waveform quality, significant current pulsations, and a tendency toward current interruption under light loads. To maintain continuous current flow in the DC motor, a bulky smoothing inductor must be added, thereby increasing the instrument’s size and weight.
From many years domestically High-capacity centrifuge Regarding usage, each type of centrifuge should be managed and maintained by a dedicated person. High-speed and ultracentrifuges require regular inspection and maintenance; users should meticulously record the experimental conditions and maintenance details to ensure the safe operation of the centrifuge. High- and low-speed centrifuges, being relatively simple to operate, can be used independently after reading the instruction manual and undergoing training on the centrifuge operating procedures. However, ultracentrifuges have a complex structure and more intricate operating procedures; improper use can easily lead to accidents. Particular care must be taken in the maintenance and use of the rotor heads.
Open-loop speed control is the simplest speed-control scheme for high-capacity centrifuges; indeed, a system can be built using as few as a dozen discrete components or even a single integrated circuit. For this reason, some low-cost centrifuges still employ this approach in China today. The main drawbacks of open-loop speed control are that it requires manual speed adjustment, cannot precisely regulate motor current, and suffers from relatively low speed accuracy and limited technical added value. Given these limitations of open-loop control, most centrifuges—both domestically and internationally—now commonly adopt a dual-loop speed-control scheme that incorporates both current feedback and speed feedback. The key advantages of high-capacity centrifuges equipped with this dual-loop system include automatic speed regulation, rapid acceleration, minimal overshoot in rotational speed, high precision, and current-limiting functionality that prevents motor damage due to overcurrent. Although DC speed control boasts a long history and mature technology, the mechanical commutator used in DC motors represents their fatal weakness, severely limiting motor speed and introducing electromagnetic interference. Moreover, the commutator necessitates regular replacement of carbon brushes, forcing early ultra-high-speed or high-speed centrifuges to resort to indirect speed-increasing methods such as gear transmissions or other alternative approaches—methods that not only increase costs and device size but also reduce service life and reliability. In the late 1970s, foreign manufacturers first began adopting variable-frequency drive (VFD) technology in ultra-high-speed centrifuges, primarily by adjusting the supply frequency to the induction motor to regulate its speed. Since induction motors do not rely on mechanical commutators, they not only eliminate the hassle of replacing carbon brushes but also enable significantly higher motor speeds—even ultra-high-speed centrifuges capable of rotating at over 100,000 rpm can now be directly driven, greatly simplifying the overall structure of the centrifuge.
Therefore, when purchasing high-capacity centrifuges, customers should consider equipping themselves with both high- and low-speed centrifuges; otherwise, they won't be able to fully leverage the equipment's advantages. Generally speaking... Large capacity Low-speed and high-speed usage frequencies are relatively high, while overspeed... Large capacity The centrifuge has a low utilization rate. High-capacity centrifuge Yes Laboratories frequently used or under consideration for procurement District-level public settings.