Basic Components and Introduction to the Centrifuge’s Rotor Chamber

Release time:

2012-12-17


Overview:

The rotor chamber is one of the most fundamental components of a centrifuge. In older centrifuges, the lid of the rotor chamber is equipped with a power switch; the motor can only be started once the lid is securely closed, ensuring safety. In newer centrifuges, the rotor chamber is fitted with an electromagnetic lock that secures the top lid before the motor starts running. The lid can only be opened after the centrifugation process is complete, the rotor has come to a stable stop, and the internal pressure has been reduced to atmospheric pressure.
  The rotor chamber is one of the most fundamental components of a centrifuge. In older centrifuges, the lid of the rotor chamber is equipped with a power switch; the motor can only be started once the lid is securely closed, ensuring safety. In newer centrifuges, the rotor chamber is fitted with an electromagnetic lock that secures the top lid before the motor starts running. The lid can only be opened after the centrifugation process is complete, the rotor has come to a stable stop, and the internal pressure has been reduced to atmospheric pressure.
  The centrifuge chamber of an ultracentrifuge is a high-vacuum, sealed cavity composed of a protective casing, a lead-lined inner chamber, a baseplate, and an upper cover. The protective casing is made of armored steel and lined with a layer of lead, which prevents fragments from scattering out of the centrifuge chamber in the event of accidental rotor rupture. The inner chamber is typically made of stainless steel or enamel, offering excellent corrosion resistance. A refrigeration pipe is wound around the exterior of the inner chamber to lower the temperature inside. Some centrifuges are also equipped with electric heating wires on the outside of the bottom of the inner chamber, serving as auxiliary heating devices used for warming up the centrifuge, defrosting, and drying purposes. Inside the centrifuge chamber, there are temperature sensors, vacuum sensors, and speed sensors; some models are even fitted with mechanical overspeed-limiting rods.