Attention to detail is a hallmark of professionalism. Each Shanghai Luxiangyi centrifuge model comes with a matching rotor.

Release time:

2018-12-12


Overview:

In fact, centrifuges had rudimentary forms as early as ancient times. Wise ancestors would tie one end of a rope to a pottery jar, hold the other end of the rope in their hands, and then spin the jar around, generating centrifugal force that squeezed out the honey inside. This was an early application of the principle of centrifugal separation.

   Centrifuge In fact, its rudimentary form already existed in ancient times. Wise ancestors tied one end of a rope to a pottery jar, held the other end of the rope in their hands, and then spun the jar around, using centrifugal force to squeeze out the honey inside—this was an early application of the principle of centrifugal separation.

  By the mid-19th century, three-legged centrifuges for textile dehydration and suspended-top centrifuges for separating crystallized sugar in sugar mills had emerged one after another. These earliest centrifuges were all operated on a batch basis and relied on manual discharge of solids.

  In the 1930s, continuously operated centrifuges emerged, and batch-operated centrifuges also saw development thanks to the implementation of automatic control.

  Centrifuges can be used for liquid clarification and solid particle enrichment, or for liquid-liquid separation. These separators come in various structural designs suitable for operation under atmospheric pressure, vacuum, and cryogenic conditions. Centrifuges are widely employed in industries such as chemical engineering, petroleum, food processing, pharmaceuticals, mineral beneficiation, coal mining, water treatment, and shipbuilding.

  Centrifuges have many technical specifications, but the most important ones include: maximum centrifugal force, maximum rotational speed, maximum capacity, and rotor model!

  Centrifugation utilizes the powerful centrifugal force generated by the high-speed rotation of a centrifuge rotor to accelerate the sedimentation rate of particles in a liquid, thereby separating substances in a sample that differ in their sedimentation coefficients and buoyant densities. The magnitude of the centrifugal force (F) depends on the angular velocity (ω, in rpm) of the centrifuge rotor and the distance (r, in cm) of the substance particles from the axis of rotation. The relationship between these variables is: F = ω²R.

  For convenience, F is often expressed in terms of relative centrifugal force, which is the multiple of Earth's gravitational acceleration. That is, the F value is divided by the acceleration due to gravity g (approximately equal to

  9.8 m/s²) The ratio of centrifugal force to gravitational force is referred to as the number of g’s. For example, if the average radius of a centrifuge rotor is 6 cm and the rotational speed is 60,000 r/min, the centrifugal force will be 240,000×g. This means that at this speed, the centrifugal force acting on the substance being centrifuged is 240,000 times greater than the Earth's normal gravitational force.

  Therefore, the relationship between rotational speed (r/min) and centrifugal force (g-value) is not directly proportional—it also depends on the radius. At the same rotational speed, if the radius doubles, the centrifugal force (g-value) will also double. The relationship between rotational speed (r/min) and centrifugal force (g-value) can be expressed by the following formula:

  G = 1.11 × (10^-5) × R × [rpm]^2

  G represents centrifugal force, typically expressed as a multiple of g (the acceleration due to gravity).

  You can find the maximum speed and maximum capacity simply by referring to the instruction manual! Of course, these figures will vary depending on the rotor model you choose—different rotors have different specifications for these parameters. Below, we’ve provided a diagram for your reference!

056.jpg

  The rotor model is a matter of great importance. As a well-established centrifuge manufacturer, Shanghai Luxiangyi Centrifuge Instrument Co., Ltd. recommends specific rotor models for each centrifuge model it designs and develops—this is the essence of attention to detail, this is true professionalism!