The rotational speed of a centrifuge is closely related to the centrifugal force.
Release time:
2018-12-17
Overview:
Centrifuge Styles on the market are truly diverse and flourishing, yet generally we tend to distinguish them based on size, speed, temperature, rotor type, volume, and whether they’re floor-standing, desktop, or handheld. Of course, as the variety of product styles continues to grow, we also classify them according to the centrifuge’s grade or level!
Traditional centrifuges have relatively imperfect functionality, especially in terms of precision regarding both rotational speed and capacity. For example, the maximum rotational speed of a typical centrifuge is 5,000 rpm, yet its actual speed often fails to reach this theoretical maximum. Such centrifuges are suitable only for routine centrifugation tasks, such as separating serum or concentrating urine. In contrast, precision centrifuges offer a wide range of functions and boast highly accurate rotational speeds and capacities, making them ideal for experiments with stringent requirements, such as PCR experiments and the separation of blood components (commonly used in blood banks).
A commonly used practice today is to set the operating conditions of a centrifuge based on relative centrifugal force (RCF) rather than rotational speed. Compared to rotational speed, RCF provides a more accurate description of the centrifugal effect. In daily use, centrifugation conditions should therefore be set according to the required relative centrifugal force. Some centrifuges can automatically convert between rotational speed and relative centrifugal force depending on the rotor type being used. For centrifuges that allow only the setting of rotational speed, you can use the formula for calculating relative centrifugal force (RCF) to determine the corresponding rotational speed. Finally, the centrifuge must be calibrated by adjusting the rotational speed to ensure accuracy.
The selection of calibration speed points can also start from the maximum rotational speed of the centrifuge being calibrated, with linear spacing that takes into account commonly used speeds and includes as many points as possible. If the centrifuge is newly installed or if only its operational condition is being tested, this testing method offers broad coverage and is more feasible and effective. In practice, when centrifuges are used in laboratories, their locations and intended applications tend to be relatively fixed, and the centrifugation conditions set for them are also relatively stable. During the calibration process, we specifically target the set rotational speeds of the centrifuge as calibration points (if the centrifuge needs to operate at multiple speeds, we try our best to select each of these speeds as a calibration point).
After testing, correcting, and confirming, ensure that the centrifuge operates accurately and reliably under all rotational speed conditions it will be used in. The selection of temperature calibration points should, at a minimum, include the set temperatures at which the centrifuge will operate. If the calibration points do not encompass the operating conditions of the centrifuge or if necessary corrections and confirmations are not performed, the validity of the calibration will be significantly compromised, and the purpose of calibration will not be achieved.
One of the criteria for distinguishing between different grades of centrifuges is the maximum centrifugal force specified by the manufacturer at the time of出厂. As we all know, during operation, the radius of the rotor and the mass of the sample remain constant; only the rotational speed can be adjusted through control. Therefore, we often tend to use rotational speed as a way to describe a centrifuge—for example, high-speed centrifuge or ultrahigh-speed centrifuge.
The selection of a centrifuge must involve a comprehensive analysis based on factors such as the size and concentration of solid particles in the suspension (or emulsion), the density difference between the solid and liquid phases (or between two liquids), the viscosity of the liquid, the characteristics of the filter cake (or sediment), and the specific separation requirements. This analysis should ensure that the moisture content of the filter cake (sediment) and the clarity of the filtrate (separated liquid) meet the desired specifications, allowing for an initial selection of the appropriate type of centrifuge. Subsequently, the type and specifications of the centrifuge should be determined according to the processing capacity and the level of automation required for operation, with final verification conducted through actual trials.
Now that you’ve reviewed the information above, do you have a better understanding of how to choose a centrifuge? If you still have any questions about your selection, please give us a call at Shanghai Luxiangyi Centrifuge Instrument Co., Ltd. Our professional technicians will be happy to provide you with answers!
Previous: