There are many types of centrifuges.

Release time:

2017-05-15


Overview:

Centrifuges are widely used in pharmaceutical and chemical enterprises. There are many different types of centrifuges. According to their operating principles, they can be classified into filter-type, sedimentation-type, separation-type, benchtop, biological cryogenic, and bypass-filter types, among others. Among the equipment used in the pharmaceutical industry, centrifuges are the most extensively employed.
   Centrifuge Its applications in pharmaceutical and chemical enterprises are quite extensive. There are many types of centrifuges, which can be classified according to their operating principles into filtration type, sedimentation type, separation type, benchtop type, biological freezing type, and bypass filtration type, among others. Among the equipment used in the pharmaceutical industry, centrifuges are the most widely employed.
  What are the operating modes of a centrifuge?
  1. When using various centrifuges, it is essential to precisely balance the centrifuge tubes and their contents on a balance beforehand. The weight difference during balancing must not exceed the range specified in the instruction manual for each particular centrifuge. Different rotors of each centrifuge have their own allowable weight differences. Under no circumstances should an odd number of tubes be loaded into a rotor. If the rotor is only partially loaded, the tubes must be arranged symmetrically opposite each other within the rotor to ensure that the load is evenly distributed around the rotor’s circumference.
  2. If centrifuging at a temperature below room temperature, the rotor should be placed in a refrigerator or pre-cooled in the rotor chamber of the centrifuge before use.
  3. During the centrifugation process, do not leave your post arbitrarily. You should continuously monitor whether the instruments on the centrifuge are functioning properly. If you hear any unusual noises, immediately stop the machine, inspect it, and promptly eliminate any malfunctions.
  4. Centrifuge Each rotor has its own maximum allowable speed and cumulative usage limit. When using a rotor, be sure to consult the instruction manual and never exceed the specified speed. Each rotor must have a dedicated usage record documenting its cumulative operating time. If the cumulative usage time exceeds the rotor’s maximum allowed limit, you must reduce the speed according to the prescribed guidelines.
  5. When loading the solution, follow the specific operating instructions for each type of centrifuge. Select appropriate centrifuge tubes based on the properties and volume of the liquid to be centrifuged. Some centrifuge tubes do not have lids; therefore, do not overfill them to prevent spillage during centrifugation, which could lead to rotor imbalance, rusting, or corrosion. For preparative ultracentrifuge tubes, it is often required to fill them completely to avoid deformation and collapse of the upper portion of the plastic tubes during centrifugation. After each use, carefully inspect the rotor, promptly clean and dry it thoroughly. The rotor is a critical component that requires special protection in the centrifuge. Handle it with care during movement—avoid any collisions or impacts that might cause scratches. If the rotor is not used for an extended period, apply a layer of polishing wax for protection. Never use centrifuge tubes that are significantly deformed, damaged, or aged.
  The development of centrifuges—the instruments used to separate samples—has seen them widely applied in fields such as biomedicine, petrochemicals, agriculture, and food hygiene. Since their inception, centrifuges have undergone a series of evolutionary stages, from low-speed to adjustable-speed and then to ultra-high-speed models. Their progress has primarily been driven by advancements in both centrifugal equipment and centrifugal technology, which complement each other closely. In terms of rotational speed, tabletop centrifuges generally fall into the categories of low-speed and high-speed centrifuges. The development of universal tabletop centrifuges has blurred the distinctions between low-speed, high-speed, micro-volume, and large-capacity centrifuges. With a wide variety of rotors available, these centrifuges offer researchers an exceptionally broad range of applications, making them the ideal choice for scientific research laboratories.
  Want to learn more about Centrifuge For more information, please stay tuned to Shanghai Luxiangyi’s updates.