Use and Management of Laboratory Centrifuges

Release time:

2014-02-18


Overview:

All types of centrifuges shall be managed and maintained by designated personnel. High-speed and ultracentrifuges require regular inspection and maintenance; users should keep detailed records of the experimental conditions and maintenance activities to ensure the safe operation of the centrifuges.


  When selecting and managing centrifuges, one should make a comprehensive assessment based on various factors. Generally, the following factors should be considered:

  (1) The purpose of centrifugation—whether it’s analytical centrifugation or preparative centrifugation;
  (2) The type and quantity of the sample—whether it’s cells, viruses, or proteins—and the sample volume—all these factors determine whether to purchase an analytical centrifuge or a preparative centrifuge; whether it should be low-speed, high-speed, or ultrahigh-speed; and whether it should be a large-capacity, standard-capacity, or microvolume centrifuge.
  (3) Economic Feasibility: Once the model has been selected, you should consider the manufacturer and the price. Price and product performance are directly correlated.
  (4) Other details: such as whether the centrifugation operation is simple, whether maintenance is convenient, whether the design is outdated, and whether spare parts that are prone to wear and tear are readily available.
  (5) Supporting Issues: A single centrifuge cannot simultaneously operate under low-speed, high-speed, and ultrahigh-speed conditions. Generally speaking, ultrahigh-speed centrifuges are designed exclusively for ultrahigh-speed applications and are not suitable for high-speed or low-speed centrifugation. Similarly, high-speed centrifuges are also not ideal for low-speed centrifugation. Therefore, when purchasing an ultrahigh-speed centrifuge, it’s important to consider equipping it with a high-speed centrifuge as well; otherwise, the advantages of the ultrahigh-speed centrifuge cannot be fully realized. In general, low-speed and high-speed centrifuges are used more frequently, whereas ultrahigh-speed centrifuges have lower utilization rates. Ultrahigh-speed centrifuges should only be purchased by laboratories that use them regularly or by regional public facilities that take such equipment into account.

  Once the model of the centrifuge has been determined, the next step is to select the appropriate rotor type. The primary considerations should be the sample volume and the centrifugation conditions. Typically, one horizontal rotor and one angle rotor—or alternatively, one high-capacity (relatively low-speed) rotor and one small-capacity, high-speed rotor—will suffice to meet the various needs in different applications. There’s no need to strive for an all-inclusive selection, as there are many types of rotors available, and many of them are quite similar. Moreover, ultracentrifuge rotors are quite expensive; if you were to equip your lab with every possible type, the cost would exceed that of the centrifuge itself by several times—and this would simply not be necessary. Since rotor prices vary significantly depending on their rotational speeds, it’s not advisable to pursue ever-higher speeds. However, you should definitely have a rotor that matches the maximum speed allowed by your centrifuge; otherwise, it would represent a waste of resources for the centrifuge. Units equipped with two centrifuges might consider using complementary rotor models to save on costs.

  Regarding the management of centrifuges, based on years of experience with centrifuge use in China, each type of centrifuge should be managed and maintained by a dedicated person. High-speed and ultracentrifuges require regular inspections and maintenance; users should keep detailed records of both experimental conditions and maintenance activities to ensure the safe operation of the centrifuge. High- and low-speed centrifuges, being relatively simple to operate, can be used independently after reading the instruction manual and undergoing training on centrifuge operating procedures. However, ultracentrifuges have complex structures and more intricate operating procedures; improper use can easily lead to accidents. Special care and attention must be given to the centrifuge rotor itself. According to years of experience with the use and management of centrifuges in China, having a dedicated person responsible for their custody and operation is essential to keeping the instruments in good condition. Personnel involved in the management and operation of these instruments should receive thorough training, enabling them not only to become familiar with the operational procedures but also to gain a solid understanding of the instruments themselves.