Summary of Aerosol-Related Knowledge in Biological Experiments
Release time:
2020-12-07
Overview:
When you talk about centrifuges and aerosols, it often feels like talking about tigers—people tend to get really scared. But actually, it’s not that scary at all!
Aerosol is a specialized chemical term that most people may be unfamiliar with. However, in reality, aerosols are quite common in our daily lives and can play a significant role.
An aerosol refers to a type of colloidal dispersion system—in particular, it is a gaseous dispersion system formed when tiny solid particles or liquid droplets are suspended and dispersed in a gaseous medium. In such a dispersion system, the dispersed phase consists of small solid or liquid particles, while the dispersing medium is a gas. To give some familiar examples from daily life, clouds and fog in the sky, as well as smoke generated by fuel combustion, are all types of aerosols. The elimination of these aerosols primarily relies on atmospheric precipitation: through collisions, coalescence, and aggregation of the small-molecule dispersed phases, they eventually settle down in the form of precipitation. Depending on the classification criteria used, aerosols can be categorized into various types.
Whenever a microbiology laboratory handles infectious materials, aerosols are inevitably generated during the process. The generation of these aerosols can pose health risks to laboratory personnel, affect atmospheric composition, damage the ozone layer, and cause environmental pollution.
High-speed refrigerated centrifuge The sealed centrifuge features excellent safety and performance, is equipped with standard certifications, and incorporates safety measures such as automatic rotor identification and lid-locking operation to ensure safe use. It can effectively prevent the dispersion and inhalation of aerosols.
In addition to selecting appropriate centrifuges, it is also necessary to strengthen training and assessment on biosafety for laboratory personnel. In particular, staff should pay close attention to the risk of aerosol contamination from centrifuges. To ensure proper operation of laboratory centrifuges, test tubes must be tightly capped and placed securely to prevent sample spillage.

For aerosol-sealed centrifugation, use an aerosol-sealed cap or lid along with a suitable container. In this regard, the following points need to be considered:
Materials: Use non-breakable materials such as PP and PE; avoid glass tubes.
Leak-proof. Ensure that the container can be closed and remain sealed—for example, by using Eppendorf tubes.
Filling volume. The maximum filling volume for each centrifuge tube—typically two-thirds or 80% of the total volume (referred to as the “working volume”)—should not be exceeded; this ensures that the liquid in the container does not come into contact with the container lid.
Droplets. These may occur in the threads of the container lid or even on the exterior of the container. During centrifugation, these droplets can become airborne, thereby forming an aerosol.
During centrifugation, personnel should not stand directly in front of the centrifuge. Wait 2–3 minutes after the centrifuge has come to a stop before opening its lid, thereby reducing the risk of aerosol exposure to staff. If necessary, wear a mask when operating the centrifuge. The outer surface of the centrifuge must be thoroughly cleaned and disinfected daily, and its interior should also be cleaned on a regular schedule. If, during operation, a centrifuge tube is not properly sealed or a test tube cracks, causing liquid to spill and contaminate the centrifuge, immediately clean and disinfect the centrifuge’s interior. Even with the implementation of the above-mentioned measures to prevent aerosol spread, given the strong dispersal capability of aerosols, it remains difficult to completely avoid contamination of laboratory air. Therefore, laboratory personnel must continue to take appropriate safety precautions to prevent inhalation of aerosols.
In addition to the above-mentioned points, pay attention to loading and unloading, disinfection, autoclaving, and seals. These are all important considerations when handling aerosols!
Previous: