The growth of centrifuges won't stop at three stages.

Release time:

2016-09-20


Overview:

A centrifuge’s structure mainly consists of several components, including a motor drive system, a refrigeration system, a mechanical system, rotors, and a system control unit. Compared to a floor-standing centrifuge, it differs only in size and capacity—being slightly smaller.

   Centrifuge The growth history of the product can currently be divided into three stages of evolution: from initial low-speed operation to self-adjusting capability, and finally achieving overspeed operation. Strictly speaking, the achievement of overspeed cannot be considered the ultimate milestone, because time keeps moving forward, and R&D innovation in the centrifuge industry will never come to a halt. Nor will any centrifuge company ever simply rest on its current products. After all, only the continuous infusion of new technologies and fresh vitality can ensure the long-term development of these products.
  Progress in centrifuges has primarily been made in two areas: centrifugal equipment and centrifugal technology—these two aspects complement each other. From the perspective of rotational speed, tabletop centrifuges generally fall into the categories of low-speed and high-speed centrifuges, thus inheriting the technical characteristics of both types. Their structure mainly consists of several components, including a motor drive system, a refrigeration system, a mechanical system, rotors, and a system control unit. Compared to floor-standing centrifuges, tabletop centrifuges differ only in size and capacity. The development of universal tabletop centrifuges has blurred the boundaries between low-speed, high-speed, micro-volume, and large-capacity centrifuges. With a wide variety of rotors available, these centrifuges offer researchers an exceptionally broad range of applications, making them an ideal model for scientific research laboratories.

 

                                                                     Centrifuge image
  Although DC speed control boasts a long history and mature technology, the mechanical commutator in DC motors remains their fatal weakness, severely limiting motor speed and introducing interference due to the commutator. Moreover, the need for frequent carbon-brush replacement further complicates maintenance. As a result, early high-speed or ultra-high-speed centrifuges had no choice but to adopt indirect speed-increasing solutions—such as gear-based transmission—or other alternative methods, which not only drove up costs and increased device size but also reduced service life and reliability. In the late 1970s, foreign manufacturers of high-speed centrifuges pioneered the adoption of variable-frequency drive (VFD) technology, primarily by adjusting the motor’s rotational speed through changes in the supply frequency of induction motors. Since induction motors do not require mechanical commutators, this approach not only eliminates the hassle of replacing carbon brushes but also significantly boosts motor speeds—enabling even ultra-high-speed centrifuges operating at over 100,000 rpm to be directly driven, thereby greatly simplifying the overall design. Centrifuge The structure.
  The speed-regulating system is the core component of a centrifuge, consisting of three major elements: control, power drive, and motor. Its primary function is to regulate the motor’s rotational speed. In the development of centrifuges, DC speed control has played an indispensable role. Its main characteristics include excellent starting and braking performance, a wide speed-regulating range, simple structure, low cost, and relatively mature theoretical and practical foundations. Consequently, before the 1980s, DC speed control was widely adopted in centrifuges and remains in use today, undergoing continuous improvements—for instance, enhancing the wear resistance of DC motor commutator segments and carbon brushes to extend motor life and increase the replacement interval for carbon brushes. Thyristor-phase-controlled DC speed control is a classic DC speed-control solution that features a simple structure and proven technology, essentially meeting the speed-regulating requirements of centrifuges. As a result, it has been widely used in centrifuges both domestically and internationally. However, its main drawbacks include poor rectification waveform, significant current ripple, and a tendency to experience current interruption under light loads. To maintain continuous current flow in the DC motor, a bulky smoothing inductor must be added, thereby increasing the instrument’s size and weight.
  With the advancement of centrifuge manufacturing and application technologies, centrifuges have not only made progress in speed-control technology but have also achieved significant strides in multifunctionality and automation. For instance, they now feature variable-rate start-up and braking, programmed speed changes, direct input of centrifugal force, storage and recall of operating procedures, automatic diagnosis of instrument status, comprehensive display of centrifuge parameters and status information, and more sophisticated safety protection features. Some of these features are not merely icing on the cake—they directly influence the effectiveness of centrifugation. For example, variable-rate start-up and braking as well as programmed speed changes can enhance banding centrifugation performance and shorten centrifugation time. In earlier centrifuge control systems, the control circuits were composed of discrete components, resulting in complex circuitry, high costs, and difficulties in implementing many functions.
  If we were to compile the history of the centrifuge industry, it wouldn't be as brief as these just over 2,300 characters. So we still warmly welcome everyone who is interested... Centrifuge Let’s work together—those who understand the industry—together explore and make greater strides in advancing our centrifuge industry.