The Shanghai Luxiangyi TD5.5 centrifuge assists in the on-site pretreatment of total phosphorus in surface water.
Release time:
2019-12-05
Overview:
Data show that total phosphorus and total nitrogen have become the primary pollutants affecting surface water quality. In 2017, the concentration of total phosphorus in surface waters nationwide decreased by 11.5% year-on-year, while the proportion of monitoring sections exceeding the standard was 19.1%. Meanwhile, the average concentration of total nitrogen in key lakes and reservoirs nationwide rose by 4% year-on-year. To address the increasingly serious issue of nitrogen and phosphorus pollution, the Chinese government has been strengthening nationwide monitoring of nitrogen and phosphorus in surface waters in recent years and has also incorporated total phosphorus and total nitrogen as essential indicators into the monitoring and evaluation system for national automatic water-quality stations.
Recently, the China National Environmental Monitoring Center issued a notice titled “Provisional Technical Regulations for On-site Pre-treatment of Total Phosphorus in Surface Water,” aimed at further standardizing the sampling and analytical pre-treatment procedures used in the national surface water total phosphorus monitoring network, thereby enhancing the accuracy of total phosphorus monitoring results.

Notice from the China National Environmental Monitoring Center (Image source: China National Environmental Monitoring Center)
Notably, among the instruments and equipment in the attachment, particular emphasis is placed on... Centrifuge Specific regulations have been established. In addition to requiring the use of on-site portable centrifuges, corresponding technical standards have also been set for these centrifuges: the centrifuge’s rotational speed must reach 2,000 rpm, the minimum centrifugation time is 1 minute, and each centrifugation run must involve at least 1 liter (1,000 ml) of water sample. These requirements represent exceptionally high performance standards for centrifuge products.
Currently, the market offers a wide variety of centrifuge equipment, but product quality and after-sales service vary considerably. Most centrifuge products fall short of fully meeting requirements in terms of centrifugal accuracy and application scope. So, what kind of centrifuge is truly suitable for on-site pretreatment of total phosphorus in surface water? Shanghai Luxiangyi Centrifuge Instrument Co., Ltd. has introduced the TD5.5 benchtop high-capacity centrifuge, which incorporates advanced foreign technology and has been carefully designed to meet domestic industry needs. This machine is a specialized piece of equipment that can be used for centrifugal separation during on-site pretreatment of total phosphorus in surface water.
It is understood that the TD5.5 desktop high-capacity centrifuge features microcomputer control and is driven by a high-torque AC variable-frequency motor, ensuring stable operation, low noise, and high rotational speed accuracy. It comes with a touch panel and programmable operation, allowing users to set and automatically store host operating parameters according to their needs. The large-screen LCD display boasts a user-friendly interface, making operation simple and convenient. Real-time conversion and setting between rpm and RCF are quick and effortless. Equipped with an electronic door lock, the centrifuge offers multiple protective functions, including automatic door-locking and overspeed protection. It also features an automatic alarm system for fault detection, ensuring safety and reliability. The centrifuge uses an integral sealing ring made of food-grade silicone rubber, which complies with GMP certification and has obtained U.S. FDA approval. Additionally, it provides 10 pre-programmed ramp-up and ramp-down rate curves, enabling users to customize the ramp-up and ramp-down times as needed.
Currently, this equipment is widely used in clinical medicine, biochemistry, genetic engineering, immunology, and other fields. It is an essential instrument for hospitals at all levels, research institutions, and higher education institutions for centrifugal separation.
For detailed parameters, please see the table below:

Parameter Table
It is reported that when using this centrifuge, you’ll need to pair it with either a 250 ml × 4 conical-bottom horizontal rotor or a 500 ml × 4 horizontal conical-bottom rotor, or alternatively, a 500 ml conical-bottom rotor paired with a 250 ml conical-bottom adapter. In addition, you must choose Corning centrifuge tubes for the conical-bottom centrifuge tubes. Most importantly, when selecting a rotor, customers must ensure it’s a conical-bottom type—absolutely avoid making the wrong choice!
If you have any questions, please feel free to call 021-68113421 or 021-68113422 to contact Shanghai Luxiangyi Centrifuge’s technical staff. We’re here to serve you with our utmost dedication!
About Shanghai Luxiangyi Centrifuge Instrument Co., Ltd.
Shanghai Luxiangyi Centrifuge Instrument Co., Ltd. boasts a long history and strong technical expertise. Since its establishment, the company has been committed to promoting the innovative development of domestically produced centrifuges. Known for their exquisite design, novel aesthetics, and superior craftsmanship, the centrifuges it manufactures are characterized by reliable quality, stable performance, and a comprehensive range of specifications. They are widely used in institutions such as universities, research institutes, biopharmaceutical companies, medical facilities, and petrochemical industries.
After more than four decades of development, Lu Xiangyi has designed and manufactured centrifuge products suitable for a wide range of applications. Currently, its centrifuge products are exported to over 40 countries, including the United States, Germany, the United Kingdom, Canada, and Thailand, earning widespread acclaim from customers for their product quality, technological expertise, and excellent service.