Chinese-made centrifuges will soon be available worldwide.

Release time:

2016-09-01


Overview:

Centrifuge
  Made in China Centrifuge Thanks to the rapid advancement of China’s scientific and technological development in recent years, both the quantity and quality of centrifuge production have soared. Moreover, Chinese centrifuges enjoy a significant price advantage over their international counterparts, leading to a substantial increase in export volumes. In just a few short years, domestically produced centrifuges have essentially become ubiquitous around the globe, making an important contribution to the global development of centrifuges. Today, China boasts a large number of centrifuge manufacturers offering a wide variety of models—everything from laboratory centrifuges to industrial ones—with highly competitive markets across the board. Yet despite this robust domestic competition, Chinese centrifuges have now reached the pinnacle of the global market. Does this mean that China’s centrifuge technology has truly attained world-class standards? The answer is no. Not only have Chinese centrifuge technologies yet to reach the top level, but there remains a considerable gap between China’s current capabilities and the internationally advanced standards. While it’s true that certain Chinese centrifuge models do stand at the forefront of global centrifuge technology in specific areas, overall, there’s still a noticeable gap to close.
  Currently, in both domestic and foreign equipment, the main components are predominantly made of stainless steel—particularly the rotating drum and screw sections, which are entirely constructed from stainless steel. Only a small number of foreign manufacturers can select appropriate materials based on the specific requirements of different treatment targets and media. For instance, in municipal wastewater treatment and non-corrosive environments, they use high-strength carbon steel with anti-corrosion coatings, thereby avoiding overdesign and significantly reducing manufacturing costs. Over more than a decade of practical application, it has been amply demonstrated that using carbon steel with anti-corrosion coatings in municipal wastewater treatment is entirely feasible.
  The rotor is the core component that distinguishes imported centrifuges from domestically produced ones. The rotor can reveal a great deal of information and is generally categorized into the following three main types:
  1. Fixed-angle rotor (commonly known as an angle rotor):
  It is primarily used to separate particle samples whose sedimentation velocities differ significantly. The particles move only a short distance in the fan-shaped liquid medium; those that hit the outer wall slide along the tube wall to the bottom of the tube, forming a precipitate. Consequently, this rotor can quickly collect the precipitate.
  2. Swing-out rotor (commonly known as a horizontal rotor):
  Primarily used for density gradient centrifugation of samples. Particles travel a long distance, and the sample in... Centrifuge In a centrifugal field, particles are ejected radially outward from the rotation rather than settling along parallel paths. As particles collide with the outer wall, they slide down along the tube’s inner surface toward the bottom of the tube, thereby inducing convection as well (though to a lesser extent than in fixed-angle rotors). At low speeds, vibrations may occur during startup or shutdown, which can adversely affect the separation efficiency.
  3. Continuous-flow centrifugal rotor:
  Centrifuges are primarily used for high-speed separation of small particulate matter from suspension media—for example, separating cells from culture media. During operation, the suspended sample flows into the centrifuge chamber from the center of the rotor at a certain velocity. Due to differences in the densities of the components in the solution, under the action of the centrifugal force field, heavier particles experience greater inertial centrifugal forces and settle more rapidly. When the flow rate increases (or decreases) to a specific value, the heavier particles will remain at the bottom along the outer edge of the centrifuge chamber, while the lighter particles will be carried away through the outlet along with the medium. The separated components can be collected either by flushing them out of the centrifuge chamber or by retaining them within the rotor itself. This type of rotor employs centrifugal elutriation technology to separate whole cells or large subcellular particles. Under sterile and low-temperature conditions, the separated components maintain their activity and exhibit high recovery rates. If the direction of the liquid flow is opposite to that of the centrifugal force—that is, if it reduces the particle's running speed—it effectively increases the particle's travel distance, thereby enhancing the resolution capability.
  The domestically produced centrifuge is a new type of machine developed in recent years, featuring highly efficient filtration performance. Its drum shape is significantly more distinctive than that of conventional centrifuges; currently, there are relatively few established algorithms for analyzing the strength of drums with such specialized geometries. In light of this, this paper employs an axisymmetric finite-element stress analysis method to conduct a comprehensive optimization study on the centrifuge drum. Specifically, it optimizes the thickness dimensions of various components—including the drum body, liquid-guiding plates, drum bottom, siphon chamber wall, and overflow plate—and establishes a corresponding mathematical optimization model for the domestically produced centrifuge. Centrifuge The optimized design of the rotating drum provides a more rational theoretical basis.