The diversity of Lu Xiangyi centrifuge specifications determines the wide range of their applications.
Release time:
2016-09-13
Overview:
Lu Xiangyi Centrifuge The diversity of specifications determines the breadth of applications! Because through careful observation of the centrifuge industry, The applicable scope of a centrifuge depends on its various accessories. The functions of these accessories can significantly enhance the centrifuge’s performance. Therefore, as a professional centrifuge manufacturer, we focus on design. Lu In addition to retaining the advantages of the original model, the Xiangyi centrifuge features stepless speed regulation and is equipped with a braking device. Relevant operating parameters are displayed digitally, and its stainless steel inner chamber and stainless steel centrifuge rotor provide convenient cleaning. A wide variety of accessories cater to users’ diverse needs. The first indicator light on the left side of the panel is the power indicator light; it lights up when the power is turned on. Lu The second indicator light on the Xiangyi centrifuge is the door-lock indicator light; it illuminates when the door lock is open. The third indicator light is the centrifugation indicator light; it illuminates during centrifugation. The fourth indicator light is the incubation indicator light; it illuminates during incubation.
Various specifications Lu Xiangyi Centrifuge
The Lu Xiangyi centrifuge is equipped with a total of 7 program keys: “ Program ” Keys used to select and confirm the program; two keys, left and right. “ Displacement ” Key used to set the sequence of modification programs; two keys, up and down. “ Assignment ” Key used to set the modification position; “ Run ” Key, used to start the program; “ Stop ” Key to terminate the program VI. Installation Requirements and Normal Operating Conditions 1. Installation Requirements a) The main unit must be installed on a solid work surface, ensuring that all four feet are in contact with the surface.
Lu Xiangyi Centrifuge Separation technology is a new technique developed based on the behavior of particles in a practical centrifugal environment. Centrifugal separation technology has also undergone several generations of evolution. Lu Xiangyi Centrifuge This has led to the development of various types of products, such as low-speed medical centrifuges, high-speed centrifuges, ultrahigh-speed centrifuges, and ultrahigh-speed refrigerated centrifuges.
1. If the main power indicator light is on, you should check the wear level of the carbon brushes. If the wear exceeds one-third of their total length, replace them with new ones promptly.
2. When the main power indicator light is not illuminated, check whether the indicator light’s fuse and the indoor distribution board’s fuse have blown. Also, verify that the power cord is making good contact. If the fuse is blown, replace it with a new one and ensure the circuit remains unobstructed.
3. You should also check the vacuum pump gauge and oil pressure readings. If the oil pressure is too high but the main unit still cannot start, Lu The Xiangyi centrifuge must have its oil passages checked for blockages, especially the throttle orifices, to ensure they are unobstructed. If any orifice is blocked, it should be cleaned to restore proper flow.
4. If the bearing is damaged or its rotation is obstructed, or if there’s insufficient lubrication inside the bearing or excessive dirt buildup causing increased frictional resistance, the motor will fail to reach its rated speed. The bearing should be cleaned or replaced promptly.
5. If there is a layer of oxide on the surface of the commutator of Lu Xiangyi’s centrifuge, or if the commutator has become uneven due to burning, or if the brushes do not properly align with the outer edge of the commutator, this can cause the rotational speed to drop. Therefore, the commutator and brushes should be cleaned to ensure good contact.
6. If there is a short circuit or open circuit in the rotor winding, you can use a multimeter to check it. Lu Xiangyi centrifuge has re-wound its coils. During operation, the rotor may suffer damage—including rupture of centrifuge tubes, sample leakage, and rotor failure—due to factors such as metal fatigue, overspeeding, excessive stress, chemical corrosion, improper selection, imbalance of the rotor during use, and uncontrolled temperature.
First, we will... Lu Insert the centrifuge tubes—containing the substances to be separated—into the corresponding holes in the centrifuge rotor. (However, the amount of substance added to each centrifuge tube must be roughly equal.) Close the lid, connect the power supply, and turn on the power switch. The power indicator light will illuminate, then— “ Select time ” Select the instrument to the desired centrifugation time or to the always-on position. (Counter-clockwise final point), at this moment Lu The Xiangyi centrifuge has now entered the working state. The speed adjustment corresponds to the selected centrifugal speed, and its operating status is: Approximately 500 to 4,000 RPM. You can select the appropriate position according to your actual needs.
Lu Xiangyi Centrifuge Particles of different densities, sizes, or shapes settle under centrifugal forces at varying speeds. Therefore, a roughly spherical, non-homogeneous mixture can be separated by centrifugation. Lu Xiangyi Centrifuge It is to further study biochemistry and separate large quantities of substances.
Previous: