The development path for centrifuges is long and fraught with challenges.
Release time:
2016-03-16
Overview:
Centrifuge
Centrifuge The path of development has always been long and arduous. After conducting an in-depth market analysis, Shanghai Luxiangyi Centrifuge Instrument Co., Ltd. has preliminarily identified its development direction. The company believes that future market trends will include enhancing separation performance, developing large-scale centrifuges, improving slag-discharge mechanisms, increasing the production of specialized and combined rotor centrifuges, strengthening research on separation theory, and advancing idealized control technologies for centrifugal separation processes. The purification accuracy of centrifuges is limited by the rotational speed of the rotor, while the load-carrying capacity of bearings represents a bottleneck in selecting high-performance power drive equipment. Given the limited load-carrying capacity of conventional rolling bearings, using permanent-magnet bearings to replace traditional rolling bearings offers a promising approach to solving this issue and enabling the rotor system of centrifuges to achieve higher rotational speeds. The rotor of a centrifuge supported by permanent-magnet bearings adopts a structure designed according to reference [2], featuring bidirectional functions—radial support as well as thrust bearing capability. Based on current domestic and international research on magnetic materials, the stator and rotor materials for permanent-magnet bearings are selected from high-strength rare-earth neodymium-iron-boron (NeFeB) permanent-magnetic materials.
In conventional centrifuges, the drive belt is exposed, with only a protective cover installed at the motor end—primarily for safety reasons to enhance operational safety. However, this design does not control the dust generated by friction, which can pollute the environment. As a result, using such centrifuges in cleanroom environments is impractical. Therefore, it is essential to seal off the area where the drive belt operates, thereby preventing the escape of friction-generated dust. Centrifuge The design incorporates an intermediate chamber that uses the airflow from the inlet to seal off the gas flow generated by the discharge of solid and liquid phases, thereby achieving a sealing effect. During centrifuge operation, the centrifugal force creates a negative pressure within the chamber, ensuring that the air intake equals the air discharge. Consequently, both solid and liquid phases in the centrifuge generate an outward gas flow. The simulation system for structural design and performance analysis of the permanent-magnet bearing in the centrifuge leverages simulation technology and programming tools to conduct effective simulation tests on the designed permanent-magnet bearing, providing a solid basis for its design. The centrifuge magnetic bearing simulation system comprises four main components: a human-machine interaction interface, structural design, simulation analysis, and result processing. The structural design itself is further divided into three sub-components: component design, assembly design, and engineering drawings. This simulation system is centered on the study of permanent-magnet bearing components and assemblies, serving as the foundation for finite-element analysis and virtual prototype testing. Therefore, the accurate construction and assembly of bearing component models are crucial, directly influencing the static and dynamic performance analysis of the permanent-magnet bearing and representing a key technological aspect of the centrifuge’s permanent-magnet bearing simulation system.
During operation, the centrifuge allows liquid and gas phases to seep in, causing corrosion on the tapered surface of the main shaft and even penetrating into the bearings, thereby damaging them and affecting the normal operation of the machine. The upper bearing cover is typically equipped with structures such as skeleton seals; however, a portion of the space between the upper bearing cover and the conical hole of the rotating drum remains exposed. As a result, the gas phase within the centrifuge’s internal cavity may corrode the exposed surfaces of the main shaft. This issue is particularly relevant in the pharmaceutical industry. Centrifuge The materials being separated often contain organic solvents or media such as acids, bases, and salts. Therefore, when ordering equipment, it is essential to fully consider the sealing requirements for these areas and to incorporate either dynamic or static sealing structures to meet the sealing specifications.
In conventional centrifuges, the drive belt is exposed, with only a protective cover installed at the motor end—primarily for safety reasons to enhance operational safety. However, this design does not control the dust generated by friction, which can pollute the environment. As a result, using such centrifuges in cleanroom environments is impractical. Therefore, it is essential to seal off the area where the drive belt operates, thereby preventing the escape of friction-generated dust. Centrifuge The design incorporates an intermediate chamber that uses the airflow from the inlet to seal off the gas flow generated by the discharge of solid and liquid phases, thereby achieving a sealing effect. During centrifuge operation, the centrifugal force creates a negative pressure within the chamber, ensuring that the air intake equals the air discharge. Consequently, both solid and liquid phases in the centrifuge generate an outward gas flow. The simulation system for structural design and performance analysis of the permanent-magnet bearing in the centrifuge leverages simulation technology and programming tools to conduct effective simulation tests on the designed permanent-magnet bearing, providing a solid basis for its design. The centrifuge magnetic bearing simulation system comprises four main components: a human-machine interaction interface, structural design, simulation analysis, and result processing. The structural design itself is further divided into three sub-components: component design, assembly design, and engineering drawings. This simulation system is centered on the study of permanent-magnet bearing components and assemblies, serving as the foundation for finite-element analysis and virtual prototype testing. Therefore, the accurate construction and assembly of bearing component models are crucial, directly influencing the static and dynamic performance analysis of the permanent-magnet bearing and representing a key technological aspect of the centrifuge’s permanent-magnet bearing simulation system.
During operation, the centrifuge allows liquid and gas phases to seep in, causing corrosion on the tapered surface of the main shaft and even penetrating into the bearings, thereby damaging them and affecting the normal operation of the machine. The upper bearing cover is typically equipped with structures such as skeleton seals; however, a portion of the space between the upper bearing cover and the conical hole of the rotating drum remains exposed. As a result, the gas phase within the centrifuge’s internal cavity may corrode the exposed surfaces of the main shaft. This issue is particularly relevant in the pharmaceutical industry. Centrifuge The materials being separated often contain organic solvents or media such as acids, bases, and salts. Therefore, when ordering equipment, it is essential to fully consider the sealing requirements for these areas and to incorporate either dynamic or static sealing structures to meet the sealing specifications.