The core determining factors for centrifuge selection

Release time:

2015-09-25


Overview:

Centrifuge
   Centrifuge During professional design and manufacturing, although dynamic balancing tests have been conducted to compensate for imbalances caused by machining errors in the rotor, all centrifuges have a permissible limit for sample loading imbalance. The centrifuge-specific drive module ensures high circuit reliability. The standby cooling function allows continuous refrigeration even when the unit is in standby mode. A dedicated key is provided for displaying centrifugal force. A jog function enables short-duration centrifugation. A silent, electromechanical motor lock is employed.
  There are many different types of market centrifuges, and many customers find themselves torn between various factors when making their selection—truly caught in a dilemma. The editor believes... When selecting a centrifuge, you should consider the workload size and choose primarily based on two factors: rotational speed and capacity. :
  (1) Rotational speed:
  Centrifuges are classified according to their maximum rotational speed into low-speed centrifuges (<10,000 rpm/min), high-speed centrifuges (10,000–30,000 rpm/min), and ultrahigh-speed centrifuges (>30,000 rpm/min). Each centrifuge has a rated maximum rotational speed, which refers to the speed under no-load conditions. However, the maximum rotational speed can vary depending on the type of rotor and the mass of the sample loaded. For example, if a centrifuge is rated at 16,000 rpm/min, this means that under no-load conditions, the rotor spins 16,000 times per minute. Once a sample is added, the actual rotational speed will certainly be lower than 16,000 rpm/min. Different rotors also result in different maximum rotational speeds (an imported centrifuge can be equipped with multiple rotors; some domestic manufacturers have also successfully developed similar technology—for instance, the TG16 benchtop high-speed centrifuge, TGL16, TGL20 benchtop high-speed refrigerated centrifuge, and many other models can accommodate up to 16 different types of rotors, allowing for versatile use with a single machine). Horizontal rotors can reach up to 15,000 rpm/min, while angle rotors typically achieve around 14,000 rpm/min (in our case, the angle rotor produced by Hunan Kaida Centrifuge Factory can even reach a maximum speed of 21,000 rpm/min). For specific differences, it’s best to consult the product sales staff and technical personnel from the manufacturer. Therefore, when selecting a centrifuge, you must be careful: the centrifuge’s maximum rotational speed should be higher than your target speed. For example, if your target speed is 16,000 rpm/min, the centrifuge you choose must have a maximum speed greater than 16,000 rpm/min. Generally speaking, the separation effect depends more on the centrifugal force rather than the rotational speed itself. So sometimes, even if the rotational speed doesn’t quite meet the requirement, as long as the centrifugal force meets the standard, the desired experimental results can still be achieved. The formula for calculating centrifugal force is: RCF = 11.2 × R × (r/min / 1000)², where R represents the radius of rotation and r/min represents the rotational speed.
  (2) Capacity:
  How many sample tubes need to be centrifuged each time? And how much capacity is required for each sample tube? These factors determine a… Centrifuge The total capacity of a centrifuge—simply put—is equal to the capacity of each centrifuge tube multiplied by the number of tubes. The total capacity is matched to the workload.
  (3) Rotor:
  Centrifuge rotors are mainly divided into two types: horizontal rotors—during operation, the rotor basket remains horizontal and is perpendicular to the axis of rotation, causing the sample to settle primarily at the bottom of the centrifuge tube; and angle rotors—where the centrifuge container is fixed at a specific angle relative to the axis of rotation, causing the sample to settle both at the bottom of the centrifuge tube and along the side walls near the bottom. If you want the separated sample to concentrate at the bottom of the centrifuge tube, choose a horizontal rotor; if you want the sample to concentrate at both the bottom and the side walls near the bottom of the tube, choose an angle rotor.
  (4) Temperature:
  Some samples—such as proteins and cells—can be damaged when exposed to high temperatures. In such cases, it’s essential to choose a refrigerated centrifuge, which comes with a specified temperature range. During high-speed operation, the heat generated by the centrifuge is balanced by its cooling system at a certain temperature (typically, samples subjected to refrigerated centrifugation need to be kept between 3°C and 8°C). The exact temperature achieved depends on the rotor used: for instance, if a centrifuge has a rated temperature range of -10°C to 60°C, using a horizontal rotor during rotation can bring the temperature down to around 3°C, whereas an angle rotor might only cool the sample down to about 7°C. For detailed information on this point, it’s advisable to consult closely with the product sales representative and the technical staff at the manufacturer’s facility.
  There are also special tests or special samples that require specialized rotors, such as large-capacity bucket rotors (often used in blood banks), enzyme-linked immunosorbent assay (ELISA) plate rotors, slide rotors, PCR rotors, tube rack rotors, and capillary rotors. Each rotor has fixed specifications that are matched to the capacity of the centrifuge—for example, a 36×5 ml angle rotor not only determines the type of rotor but also dictates its specific characteristics. Centrifuge The capacity is crucial, so the selection of the rotor is very important.