Centrifuge tests should seek results in stability.
Release time:
2020-06-08
Overview:
Centrifuge The experiment relies primarily on rotational speed to achieve separation; therefore, when conducting centrifuge experiments, it’s crucial to adopt a mindset of “seeking results through steady and careful progress.” Do not rush—otherwise, the consequences could be unimaginable.
The future development trends of centrifuges will include enhancing separation performance, developing large-scale centrifugal separators, improving discharge mechanisms, introducing specialized and combined drum centrifuges, strengthening research on separation theory, and advancing optimization control technologies for centrifugal separation processes. Enhancing separation performance involves increasing the rotational speed of the drum; introducing new driving forces during the centrifugal separation process; accelerating the rate of solid discharge; and extending the separation time by increasing the length of the drum. The development of large-scale centrifuges primarily focuses on increasing the drum diameter and adopting double-sided drums to boost processing capacity, thereby reducing equipment investment, energy consumption, and maintenance costs per unit volume of material processed. In terms of theoretical research, the main areas of focus are studying the flow patterns of fluids inside the drum and the mechanisms underlying filter cake formation, as well as developing computational methods for determining minimum separation efficiency and processing capacity.

Centrifuge image
When a centrifuge is in operation, it typically runs at very high speeds. Therefore, during experiments, it’s crucial to strengthen management to ensure that the high-speed centrifuge functions properly and operates safely. On the one hand, this ensures that our laboratory can carry out its work in an orderly manner; on the other hand, it guarantees the safety of the high-speed centrifuge during operation. Under normal circumstances, you can follow the procedure below for inspection:
1. The centrifuge’s exterior is intact, and no parts are missing.
2. The power supply is properly connected, and the control switch is in good working condition.
3. After the centrifuge is started, it must operate normally. All parameter-setting functions—such as setting temperature, setting time, setting centrifugal speed, and setting rotor status—must function properly.
4. Centrifugal Efficiency Verification: Take a centrifuge tube containing 5 mL of sample and centrifuge it at speeds of 5,000 rpm, 10,000 rpm, 15,000 rpm, and 20,000 rpm for 5 minutes each. Then, examine the separation status of solid and liquid phases at different centrifugal speeds. As the centrifugal speed increases, the separation effect should progressively improve.
5. Time Verification: The error, when comparing the accurate timetable with the instrument-set time, should not exceed ±0.1 minute.
6. Temperature Verification: Set three different temperature values—such as 5℃, 10℃, and 15℃—separately. At the same centrifugal speed, centrifuge for approximately 10 minutes. Then, remove the centrifuge tubes and use thermometers to measure the temperature of the solutions inside each tube. The measured temperatures should not deviate from the set values by more than ±1℃.
7. Pay attention to properly configuring and checking each item, and carefully keep the relevant records.

Centrifuge image
Centrifugal filtration utilizes the centrifugal pressure generated by the centrifugal force acting on a suspension, which is applied to the filtration medium. As a result, the liquid passes through the filtration medium to become the filtrate, while solid particles are retained on the surface of the filtration medium, thereby achieving liquid-solid separation. Centrifugal sedimentation, on the other hand, leverages the principle that components of a suspension (or emulsion) with differing densities rapidly settle and stratify under the influence of centrifugal force, thus enabling liquid-solid (or liquid-liquid) separation. There is also a class of separators used for experimental analysis that can perform liquid clarification and solid particle enrichment, or liquid-liquid separation. These separators come in various structural designs suitable for operation under atmospheric pressure, vacuum, or cryogenic conditions.

Centrifuge Rotor Diagram
Actually, operating a centrifuge isn't difficult—just focus on these key points: carefully inspect and select the correct tubes, choose the right rotor and adapter, and ensure that the weights inside the centrifuge are balanced. When balancing multiple tubes at once, use the tube rack or beaker positioned on top of the scale surface. These steps may seem simple, but they’re actually quite challenging to execute properly. Never rush—when conducting centrifuge experiments, stability is paramount.