The technology of centrifuges needs continuous development, and companies need to keep innovating.

Release time:

2019-11-27


Overview:

Overall, the entire centrifuge industry is entering a new golden era of development. In the course of this rapid growth, there will inevitably be a survival-of-the-fittest dynamic—a natural outcome of market rules. Yet, this very dynamic also presents an opportunity for companies to thrive. Only by promptly adjusting their development strategies and innovating their management models can centrifuge enterprises maintain their vitality, sustain growth, and ensure long-term development.

   Centrifuge Technological development is endless, and enterprises also need to continuously innovate and evolve. Now, let’s learn together with the editor about some key information on centrifuges—details that users who frequently operate centrifuges should definitely understand.
  A centrifuge is a mechanical device that uses centrifugal force to separate the components of a mixture consisting of liquids and solid particles or of two immiscible liquids. Centrifuges are primarily used to separate solid particles from liquids in suspensions, or to separate two immiscible liquids with different densities in emulsions. They can also be used to remove liquids from wet solids. Special high-speed tubular separators can even separate gas mixtures of different densities. Leveraging the principle that solid particles of different densities or particle sizes settle at different rates in a liquid, some sedimentation centrifuges can also classify solid particles according to their density or particle size.
  The speed difference between the centrifuge’s drum and the inner screw is 28 rpm. The inner screw’s bearings are lubricated with grease, which needs to be replaced every quarter. However, after a large amount of grease was added from one side, no new grease could be expelled from the other side, indicating an abnormal situation. Upon disassembling and inspecting the centrifuge, we found that water had entered the inner screw’s bearings and the mechanical seal was damaged, causing the grease to leak out through the seal. The maintenance was carried out relatively promptly, thus preventing the bearings from burning out.
  A centrifuge is a mechanical device that uses centrifugal force to separate the components of a mixture consisting of liquids and solid particles or liquids and other liquids. It is primarily used to collect microorganisms, cellular debris, cells, large organelles, sulfate precipitates, and immunoprecipitates, among others. Proper operation and scientific maintenance of a centrifuge can significantly extend its service life.
  When the instrument is not in use or undergoing maintenance, the main power plug should be unplugged. The interval between turning the centrifuge on and off must be greater than 3 minutes to protect the refrigeration compressor. Centrifuge tubes should be replaced regularly; tubes that are nearing rupture should no longer be used. The rotor requires careful maintenance: when not in use, it should be removed and cleaned with a neutral detergent. The central bore of the rotor should be lubricated and maintained regularly. The rotor must never be used if it shows cracks, signs of corrosion, or has exceeded its shelf life. Before using the centrifuge, always inspect the rotor carefully.
  Pay attention to the operating environment: If the temperature exceeds 30℃, pre-cool both the rotor and the centrifuge chamber, and reduce the rotor speed. When using the centrifuge, select a rotor that matches the rotor number set on the centrifuge, or verify that the rotor number setting corresponds exactly to the actual rotor being used. After use, lubricate and protect the conical surface of the motor spindle—for example, by applying a neutral lubricant grease.
  Precautions for selecting a centrifuge:
  1. When the liquid phase consists of volatile, explosive, or flammable materials, vacuum filtration is not permitted, and the system must be sealed and explosion-proof.
  2. Materials with strong corrosivity place special requirements on the selection of materials for separation machinery.
  3. When the solid-phase particles have high hardness, the selected separation machinery materials must exhibit good wear resistance.
  4. For separated materials—whether solid or liquid—if they are valuable, the centrifuge is required to have a high recovery rate.
  5. When the solid-phase material is a crystalline product, it is essential to minimize damage to the crystals during separation. This places special demands on the structure of the separation equipment as well as on its discharge methods and techniques. For such products, the centrifuge must be selected based on factors including the size and concentration of solid particles in the suspension (or emulsion), the density difference between the solid and the liquid (or between two liquids), the viscosity of the liquid, and the characteristics of the filter cake (or sediment).
  Overall, the entire centrifuge industry is entering a new golden era of development. In the process of rapid growth, there will inevitably be a survival-of-the-fittest dynamic—this is simply part of the market’s rules. Yet at the same time, it also presents an opportunity for companies to thrive. Only by promptly adjusting their development strategies and innovating their management models can enterprises succeed. Centrifuge Enterprises maintain vitality, sustain growth, and ensure development.